{"title":"一种利用自放置惯性测量单元实时计算行走和跑步过程中关节角度的机器学习方法","authors":"David C. Ackland, Zhou Fang, Damith Senanayake","doi":"10.1016/j.gaitpost.2025.01.028","DOIUrl":null,"url":null,"abstract":"<div><h3>Background</h3><div>Inter-segment joint angles can be obtained from inertial measurement units (IMUs); however, accurate 3D joint motion measurement, which requires sensor fusion and signal processing, sensor alignment with segments and joint axis calibration, can be challenging to achieve.</div></div><div><h3>Research question</h3><div>Can an artificial neural network modeling framework be used for direct, real-time conversion of IMU data to joint angles during walking and running, and how does sensor number, location on the body and gait speed impact prediction accuracy?</div></div><div><h3>Methods</h3><div>Thirty healthy adult participants performed gait experiments in which kinematics data were obtained from self-placed IMUs and video motion analysis, the reference standard for joint kinematics. Data were collected during walking at 0.5 m/s, 1.0 m/s and 1.5 m/s, as well as during running at 2.0 m/s and 3.0 m/s. A generative adversarial network was trained and used to predict lower limb joint angles at all gait speeds using IMU data only, and prediction accuracy assessed using all combinations of sensors.</div></div><div><h3>Results</h3><div>Joint angle prediction accuracy was strongly dependent on the number and location of sensors, as well as walking and running speed. A single IMU could be used to predict sagittal plane joint angles at either the hip, knee or ankle during walking with RMS errors below 4.0°, though highest 3D joint motion accuracy was obtained with two or three IMUs for a given joint.</div></div><div><h3>Significance</h3><div>This study reports a modeling framework for direct conversion of IMU data to joint angles without signal processing or joint calibration. The findings suggest that combinations of up to four IMUs reproduce hip, knee and ankle joint kinematics simultaneously during walking and running with highest accuracy. The findings may be useful in maximizing accuracy of IMU-based motion measurements of the lower limb joints in applications such as remote monitoring of movement, sports training, and in rehabilitation.</div></div>","PeriodicalId":12496,"journal":{"name":"Gait & posture","volume":"118 ","pages":"Pages 85-91"},"PeriodicalIF":2.4000,"publicationDate":"2025-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A machine learning approach to real-time calculation of joint angles during walking and running using self-placed inertial measurement units\",\"authors\":\"David C. Ackland, Zhou Fang, Damith Senanayake\",\"doi\":\"10.1016/j.gaitpost.2025.01.028\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><h3>Background</h3><div>Inter-segment joint angles can be obtained from inertial measurement units (IMUs); however, accurate 3D joint motion measurement, which requires sensor fusion and signal processing, sensor alignment with segments and joint axis calibration, can be challenging to achieve.</div></div><div><h3>Research question</h3><div>Can an artificial neural network modeling framework be used for direct, real-time conversion of IMU data to joint angles during walking and running, and how does sensor number, location on the body and gait speed impact prediction accuracy?</div></div><div><h3>Methods</h3><div>Thirty healthy adult participants performed gait experiments in which kinematics data were obtained from self-placed IMUs and video motion analysis, the reference standard for joint kinematics. Data were collected during walking at 0.5 m/s, 1.0 m/s and 1.5 m/s, as well as during running at 2.0 m/s and 3.0 m/s. A generative adversarial network was trained and used to predict lower limb joint angles at all gait speeds using IMU data only, and prediction accuracy assessed using all combinations of sensors.</div></div><div><h3>Results</h3><div>Joint angle prediction accuracy was strongly dependent on the number and location of sensors, as well as walking and running speed. A single IMU could be used to predict sagittal plane joint angles at either the hip, knee or ankle during walking with RMS errors below 4.0°, though highest 3D joint motion accuracy was obtained with two or three IMUs for a given joint.</div></div><div><h3>Significance</h3><div>This study reports a modeling framework for direct conversion of IMU data to joint angles without signal processing or joint calibration. The findings suggest that combinations of up to four IMUs reproduce hip, knee and ankle joint kinematics simultaneously during walking and running with highest accuracy. The findings may be useful in maximizing accuracy of IMU-based motion measurements of the lower limb joints in applications such as remote monitoring of movement, sports training, and in rehabilitation.</div></div>\",\"PeriodicalId\":12496,\"journal\":{\"name\":\"Gait & posture\",\"volume\":\"118 \",\"pages\":\"Pages 85-91\"},\"PeriodicalIF\":2.4000,\"publicationDate\":\"2025-05-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Gait & posture\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0966636225000281\",\"RegionNum\":3,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2025/1/26 0:00:00\",\"PubModel\":\"Epub\",\"JCR\":\"Q3\",\"JCRName\":\"NEUROSCIENCES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Gait & posture","FirstCategoryId":"3","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0966636225000281","RegionNum":3,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2025/1/26 0:00:00","PubModel":"Epub","JCR":"Q3","JCRName":"NEUROSCIENCES","Score":null,"Total":0}
A machine learning approach to real-time calculation of joint angles during walking and running using self-placed inertial measurement units
Background
Inter-segment joint angles can be obtained from inertial measurement units (IMUs); however, accurate 3D joint motion measurement, which requires sensor fusion and signal processing, sensor alignment with segments and joint axis calibration, can be challenging to achieve.
Research question
Can an artificial neural network modeling framework be used for direct, real-time conversion of IMU data to joint angles during walking and running, and how does sensor number, location on the body and gait speed impact prediction accuracy?
Methods
Thirty healthy adult participants performed gait experiments in which kinematics data were obtained from self-placed IMUs and video motion analysis, the reference standard for joint kinematics. Data were collected during walking at 0.5 m/s, 1.0 m/s and 1.5 m/s, as well as during running at 2.0 m/s and 3.0 m/s. A generative adversarial network was trained and used to predict lower limb joint angles at all gait speeds using IMU data only, and prediction accuracy assessed using all combinations of sensors.
Results
Joint angle prediction accuracy was strongly dependent on the number and location of sensors, as well as walking and running speed. A single IMU could be used to predict sagittal plane joint angles at either the hip, knee or ankle during walking with RMS errors below 4.0°, though highest 3D joint motion accuracy was obtained with two or three IMUs for a given joint.
Significance
This study reports a modeling framework for direct conversion of IMU data to joint angles without signal processing or joint calibration. The findings suggest that combinations of up to four IMUs reproduce hip, knee and ankle joint kinematics simultaneously during walking and running with highest accuracy. The findings may be useful in maximizing accuracy of IMU-based motion measurements of the lower limb joints in applications such as remote monitoring of movement, sports training, and in rehabilitation.
期刊介绍:
Gait & Posture is a vehicle for the publication of up-to-date basic and clinical research on all aspects of locomotion and balance.
The topics covered include: Techniques for the measurement of gait and posture, and the standardization of results presentation; Studies of normal and pathological gait; Treatment of gait and postural abnormalities; Biomechanical and theoretical approaches to gait and posture; Mathematical models of joint and muscle mechanics; Neurological and musculoskeletal function in gait and posture; The evolution of upright posture and bipedal locomotion; Adaptations of carrying loads, walking on uneven surfaces, climbing stairs etc; spinal biomechanics only if they are directly related to gait and/or posture and are of general interest to our readers; The effect of aging and development on gait and posture; Psychological and cultural aspects of gait; Patient education.