Qiang Song , Tiantian Song , Jiao Nie , Hong Zhou , Yaru Hu , Yanxin Chen , Yang Deng , Qian He , Fuan Cheng
{"title":"将煤矸石和煤气化渣作为还原剂协同利用钢渣生产高活性辅助胶凝材料的研究","authors":"Qiang Song , Tiantian Song , Jiao Nie , Hong Zhou , Yaru Hu , Yanxin Chen , Yang Deng , Qian He , Fuan Cheng","doi":"10.1016/j.conbuildmat.2025.141094","DOIUrl":null,"url":null,"abstract":"<div><div>To explore the synergistic effect of iron recovery and the hydration reactivity of the residue, steel slag was heated and reduced at different temperatures using coal gangue and coal gasification slag as reducing agents. The resulting aluminosilicates were then quenched in water. The content of Fe in reduced ferroalloys and water quenching residues is determined. X-ray diffraction, infrared spectroscopy, microcalorimeter, etc. were used to analyze the phase changes and hydration activity of water quenching residues. The results show that the increase of reduction temperature can significantly improve the iron recovery rate, reaching a maximum of 98.5 %, and an iron grade of 98 %. When the reduction temperature is below 1450 ℃, the mineral phases in the water quenching residues are mainly merwinite and gehlenite. With the temperature increase to 1450 ℃ and 1500 ℃, the phases of merwinite and gehlenite disappeared. At this time, the water quenching residues is mainly composed of glass phase. The increase of reduction temperature leads to an increase of the glass content in the water quenching residues, enhancing the hydration activity. The cumulative heat release of cement hydration reaction is greater when high reduction temperature water quenching residues is added. The compressive strength development rate of water quenching residues cement is higher than that of reference cement. After 28 d, the compressive strength of cement prepared with 30 wt% water quenching residues (reduced at 1400 ℃) reaches 90 % of the reference cement strength.</div></div>","PeriodicalId":288,"journal":{"name":"Construction and Building Materials","volume":"477 ","pages":"Article 141094"},"PeriodicalIF":8.0000,"publicationDate":"2025-05-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"An investigation on the use of coal gangue and coal gasification slag as reducing agent in synergistic utilization of steel slag for higher-activity supplementary cementitious materials\",\"authors\":\"Qiang Song , Tiantian Song , Jiao Nie , Hong Zhou , Yaru Hu , Yanxin Chen , Yang Deng , Qian He , Fuan Cheng\",\"doi\":\"10.1016/j.conbuildmat.2025.141094\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>To explore the synergistic effect of iron recovery and the hydration reactivity of the residue, steel slag was heated and reduced at different temperatures using coal gangue and coal gasification slag as reducing agents. The resulting aluminosilicates were then quenched in water. The content of Fe in reduced ferroalloys and water quenching residues is determined. X-ray diffraction, infrared spectroscopy, microcalorimeter, etc. were used to analyze the phase changes and hydration activity of water quenching residues. The results show that the increase of reduction temperature can significantly improve the iron recovery rate, reaching a maximum of 98.5 %, and an iron grade of 98 %. When the reduction temperature is below 1450 ℃, the mineral phases in the water quenching residues are mainly merwinite and gehlenite. With the temperature increase to 1450 ℃ and 1500 ℃, the phases of merwinite and gehlenite disappeared. At this time, the water quenching residues is mainly composed of glass phase. The increase of reduction temperature leads to an increase of the glass content in the water quenching residues, enhancing the hydration activity. The cumulative heat release of cement hydration reaction is greater when high reduction temperature water quenching residues is added. The compressive strength development rate of water quenching residues cement is higher than that of reference cement. After 28 d, the compressive strength of cement prepared with 30 wt% water quenching residues (reduced at 1400 ℃) reaches 90 % of the reference cement strength.</div></div>\",\"PeriodicalId\":288,\"journal\":{\"name\":\"Construction and Building Materials\",\"volume\":\"477 \",\"pages\":\"Article 141094\"},\"PeriodicalIF\":8.0000,\"publicationDate\":\"2025-05-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Construction and Building Materials\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0950061825012425\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2025/4/19 0:00:00\",\"PubModel\":\"Epub\",\"JCR\":\"Q1\",\"JCRName\":\"CONSTRUCTION & BUILDING TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Construction and Building Materials","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0950061825012425","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2025/4/19 0:00:00","PubModel":"Epub","JCR":"Q1","JCRName":"CONSTRUCTION & BUILDING TECHNOLOGY","Score":null,"Total":0}
引用次数: 0
摘要
为了探索铁回收和残渣水化反应性的协同效应,使用煤矸石和煤气化渣作为还原剂,在不同温度下对钢渣进行加热和还原。然后将生成的铝硅酸盐在水中淬火。测定了还原铁合金和水淬残渣中的铁含量。利用 X 射线衍射、红外光谱、微量热仪等分析了水淬残渣的相变和水化活性。结果表明,提高还原温度可显著提高铁回收率,最高可达 98.5%,铁品位为 98%。当还原温度低于 1450 ℃ 时,水淬残渣中的矿物相主要是梅花石和gehlenite。随着温度升高到 1450 ℃ 和 1500 ℃,梅花石和格氏石相消失。此时,水淬残留物主要由玻璃相组成。还原温度的升高导致水淬残留物中玻璃相含量的增加,从而提高了水化活性。加入高还原温度的水淬渣时,水泥水化反应的累积放热量更大。水淬渣水泥的抗压强度发展速度高于基准水泥。28 d 后,用 30 wt%的水淬渣配制的水泥(还原温度为 1400 ℃)的抗压强度达到基准水泥强度的 90%。
An investigation on the use of coal gangue and coal gasification slag as reducing agent in synergistic utilization of steel slag for higher-activity supplementary cementitious materials
To explore the synergistic effect of iron recovery and the hydration reactivity of the residue, steel slag was heated and reduced at different temperatures using coal gangue and coal gasification slag as reducing agents. The resulting aluminosilicates were then quenched in water. The content of Fe in reduced ferroalloys and water quenching residues is determined. X-ray diffraction, infrared spectroscopy, microcalorimeter, etc. were used to analyze the phase changes and hydration activity of water quenching residues. The results show that the increase of reduction temperature can significantly improve the iron recovery rate, reaching a maximum of 98.5 %, and an iron grade of 98 %. When the reduction temperature is below 1450 ℃, the mineral phases in the water quenching residues are mainly merwinite and gehlenite. With the temperature increase to 1450 ℃ and 1500 ℃, the phases of merwinite and gehlenite disappeared. At this time, the water quenching residues is mainly composed of glass phase. The increase of reduction temperature leads to an increase of the glass content in the water quenching residues, enhancing the hydration activity. The cumulative heat release of cement hydration reaction is greater when high reduction temperature water quenching residues is added. The compressive strength development rate of water quenching residues cement is higher than that of reference cement. After 28 d, the compressive strength of cement prepared with 30 wt% water quenching residues (reduced at 1400 ℃) reaches 90 % of the reference cement strength.
期刊介绍:
Construction and Building Materials offers an international platform for sharing innovative and original research and development in the realm of construction and building materials, along with their practical applications in new projects and repair practices. The journal publishes a diverse array of pioneering research and application papers, detailing laboratory investigations and, to a limited extent, numerical analyses or reports on full-scale projects. Multi-part papers are discouraged.
Additionally, Construction and Building Materials features comprehensive case studies and insightful review articles that contribute to new insights in the field. Our focus is on papers related to construction materials, excluding those on structural engineering, geotechnics, and unbound highway layers. Covered materials and technologies encompass cement, concrete reinforcement, bricks and mortars, additives, corrosion technology, ceramics, timber, steel, polymers, glass fibers, recycled materials, bamboo, rammed earth, non-conventional building materials, bituminous materials, and applications in railway materials.