Influence of wire spacing and plate spacing on electrostatic precipitation of nanoparticles: An approach involving electrostatic shielding and diffusion charging

Electrostatic precipitation is a process widely used as gas cleaning device, to removal particles from gas flows. However, in a conventional and well-sized precipitator, the collection efficiency decreases for ultrafine particles, making it difficult to employ this equipment for controlling nanoparticle pollution. This paper investigates the influence of plate spacing (4 and 6.5 cm) and wire spacing (4, 6, and 12 cm) on the electric current and nanoparticle collection efficiency, considering the effect of diffusion charging and electrostatic shielding. Two laboratory-scale dry wire-plate electrostatic precipitators with different plate spacings were tested for the collection of nanoparticles (6.15–241.4 nm) at three air velocities (1.9, 2.9, and 3.9 cm/s). The results demonstrated the effectiveness of the equipment in removing nanoparticles (99.9%) under the highest electric fields. Higher values of the wire spacing led to increases in the current and the collection efficiency. This was associated with reduced electrostatic shielding, which is more evident in smaller ducts with a higher density of field lines. It is expected that the findings should improve knowledge on electrostatic precipitation of nanoparticles, enabling optimization of collection efficiency by considering the effects of geometric parameters.