用石英晶体微天平测量聚苯乙烯光降解率。

IF 3.8 4区工程技术 Q1 BIOCHEMICAL RESEARCH METHODS IET nanobiotechnology Pub Date : 2022-04-01 Epub Date: 2022-01-08 DOI:10.1049/nbt2.12076

Abdullah N Alodhayb

{"title":"用石英晶体微天平测量聚苯乙烯光降解率。","authors":"Abdullah N Alodhayb","doi":"10.1049/nbt2.12076","DOIUrl":null,"url":null,"abstract":"Polystyrene is a very popular polymer utilised in the manufacture of various consumer products. This polymer is very cheap; however, after its usage, the slowness of its photodegradation leads to environmental pollution. In this report, the author presents a technique to systematically measure the rate of photodegradation of a thin polystyrene film. The said film was made to coat a quartz crystal microbalance (QCM) sensor. In order to detect polymer degradation and the reduction in the molecular weight, the resonance frequency of the sensor was monitored for 24 h. Results revealed that QCM sensor irradiation with ultraviolet light with a wavelength of 365 nm and optical power of 1.5 mW caused a quite significant change in the polymer structure.","PeriodicalId":13393,"journal":{"name":"IET nanobiotechnology","volume":null,"pages":null},"PeriodicalIF":3.8000,"publicationDate":"2022-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8918915/pdf/","citationCount":"1","resultStr":"{\"title\":\"Measurement of polystyrene photodegradation rate using a quartz crystal microbalance.\",\"authors\":\"Abdullah N Alodhayb\",\"doi\":\"10.1049/nbt2.12076\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Polystyrene is a very popular polymer utilised in the manufacture of various consumer products. This polymer is very cheap; however, after its usage, the slowness of its photodegradation leads to environmental pollution. In this report, the author presents a technique to systematically measure the rate of photodegradation of a thin polystyrene film. The said film was made to coat a quartz crystal microbalance (QCM) sensor. In order to detect polymer degradation and the reduction in the molecular weight, the resonance frequency of the sensor was monitored for 24 h. Results revealed that QCM sensor irradiation with ultraviolet light with a wavelength of 365 nm and optical power of 1.5 mW caused a quite significant change in the polymer structure.\",\"PeriodicalId\":13393,\"journal\":{\"name\":\"IET nanobiotechnology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.8000,\"publicationDate\":\"2022-04-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8918915/pdf/\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IET nanobiotechnology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1049/nbt2.12076\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2022/1/8 0:00:00\",\"PubModel\":\"Epub\",\"JCR\":\"Q1\",\"JCRName\":\"BIOCHEMICAL RESEARCH METHODS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IET nanobiotechnology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1049/nbt2.12076","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2022/1/8 0:00:00","PubModel":"Epub","JCR":"Q1","JCRName":"BIOCHEMICAL RESEARCH METHODS","Score":null,"Total":0}

引用次数: 1

摘要

聚苯乙烯是一种非常流行的聚合物，用于制造各种消费品。这种聚合物非常便宜;然而，其使用后，其光降解缓慢导致环境污染。本文介绍了一种系统测量聚苯乙烯薄膜光降解速率的方法。所述薄膜被制成覆盖石英晶体微平衡(QCM)传感器。为了检测聚合物的降解和分子量的降低，对传感器的共振频率进行了24 h的监测。结果表明，波长为365 nm、光功率为1.5 mW的紫外光照射QCM传感器后，聚合物结构发生了相当显著的变化。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

摘要图片

查看原文

微信好友朋友圈 QQ好友复制链接

本刊更多论文

Measurement of polystyrene photodegradation rate using a quartz crystal microbalance.

Polystyrene is a very popular polymer utilised in the manufacture of various consumer products. This polymer is very cheap; however, after its usage, the slowness of its photodegradation leads to environmental pollution. In this report, the author presents a technique to systematically measure the rate of photodegradation of a thin polystyrene film. The said film was made to coat a quartz crystal microbalance (QCM) sensor. In order to detect polymer degradation and the reduction in the molecular weight, the resonance frequency of the sensor was monitored for 24 h. Results revealed that QCM sensor irradiation with ultraviolet light with a wavelength of 365 nm and optical power of 1.5 mW caused a quite significant change in the polymer structure.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

IET nanobiotechnology 工程技术-纳米科技

CiteScore

6.20

自引率

4.30%

发文量

审稿时长

1 months

期刊介绍： Electrical and electronic engineers have a long and illustrious history of contributing new theories and technologies to the biomedical sciences. This includes the cable theory for understanding the transmission of electrical signals in nerve axons and muscle fibres; dielectric techniques that advanced the understanding of cell membrane structures and membrane ion channels; electron and atomic force microscopy for investigating cells at the molecular level. Other engineering disciplines, along with contributions from the biological, chemical, materials and physical sciences, continue to provide groundbreaking contributions to this subject at the molecular and submolecular level. Our subject now extends from single molecule measurements using scanning probe techniques, through to interactions between cells and microstructures, micro- and nano-fluidics, and aspects of lab-on-chip technologies. The primary aim of IET Nanobiotechnology is to provide a vital resource for academic and industrial researchers operating in this exciting cross-disciplinary activity. We can only achieve this by publishing cutting edge research papers and expert review articles from the international engineering and scientific community. To attract such contributions we will exercise a commitment to our authors by ensuring that their manuscripts receive rapid constructive peer opinions and feedback across interdisciplinary boundaries. IET Nanobiotechnology covers all aspects of research and emerging technologies including, but not limited to: Fundamental theories and concepts applied to biomedical-related devices and methods at the micro- and nano-scale (including methods that employ electrokinetic, electrohydrodynamic, and optical trapping techniques) Micromachining and microfabrication tools and techniques applied to the top-down approach to nanobiotechnology Nanomachining and nanofabrication tools and techniques directed towards biomedical and biotechnological applications (e.g. applications of atomic force microscopy, scanning probe microscopy and related tools) Colloid chemistry applied to nanobiotechnology (e.g. cosmetics, suntan lotions, bio-active nanoparticles) Biosynthesis (also known as green synthesis) of nanoparticles; to be considered for publication, research papers in this area must be directed principally towards biomedical research and especially if they encompass in vivo models or proofs of concept. We welcome papers that are application-orientated or offer new concepts of substantial biomedical importance Techniques for probing cell physiology, cell adhesion sites and cell-cell communication Molecular self-assembly, including concepts of supramolecular chemistry, molecular recognition, and DNA nanotechnology Societal issues such as health and the environment Special issues. Call for papers: Smart Nanobiosensors for Next-generation Biomedical Applications - https://digital-library.theiet.org/files/IET_NBT_CFP_SNNBA.pdf Selected extended papers from the International conference of the 19th Asian BioCeramic Symposium - https://digital-library.theiet.org/files/IET_NBT_CFP_ABS.pdf