Mahdi Mirzaaghaei, F. Qods, H. Arabi, M. Milani, B. Mohammad Sadeghi, M. Nourbakhsh
{"title":"SPS(MA-SPS)烧结Ti-15%Mo合金的力学性能和微观组织研究","authors":"Mahdi Mirzaaghaei, F. Qods, H. Arabi, M. Milani, B. Mohammad Sadeghi, M. Nourbakhsh","doi":"10.1080/00325899.2022.2102839","DOIUrl":null,"url":null,"abstract":"ABSTRACT The goal of this study was to investigate the mechanical properties and microstructure of Ti-15% Mo alloy fabricated using the mechanical alloying and spark plasma sintering (MA-SPS) method. Accordingly, Ti and Mo powders were milled for different times, including 5, 15, 25, 35, and 45 h, and the SPS technique for sintering under a pressure of 25 MPa at 1100°C was used. The X-ray diffraction (XRD) analysis, optical and electron microscopy (SEM), hardness measurements, and compression testing were used to study the phases formed, the morphology of powders, microstructure, and mechanical properties of the as-prepared samples, respectively. The results revealed that owing to increasing the mechanical milling time, the percentage of the beta phase formed was higher, and in addition, it influenced the microstructure and mechanical properties of the samples fabricated after the sintering process. GRAPHICAL ABSTRACT","PeriodicalId":20392,"journal":{"name":"Powder Metallurgy","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2022-07-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Investigation of mechanical properties and microstructure of Ti-15% Mo alloy produced by mechanical alloying and sintering with SPS (MA-SPS)\",\"authors\":\"Mahdi Mirzaaghaei, F. Qods, H. Arabi, M. Milani, B. Mohammad Sadeghi, M. Nourbakhsh\",\"doi\":\"10.1080/00325899.2022.2102839\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"ABSTRACT The goal of this study was to investigate the mechanical properties and microstructure of Ti-15% Mo alloy fabricated using the mechanical alloying and spark plasma sintering (MA-SPS) method. Accordingly, Ti and Mo powders were milled for different times, including 5, 15, 25, 35, and 45 h, and the SPS technique for sintering under a pressure of 25 MPa at 1100°C was used. The X-ray diffraction (XRD) analysis, optical and electron microscopy (SEM), hardness measurements, and compression testing were used to study the phases formed, the morphology of powders, microstructure, and mechanical properties of the as-prepared samples, respectively. The results revealed that owing to increasing the mechanical milling time, the percentage of the beta phase formed was higher, and in addition, it influenced the microstructure and mechanical properties of the samples fabricated after the sintering process. GRAPHICAL ABSTRACT\",\"PeriodicalId\":20392,\"journal\":{\"name\":\"Powder Metallurgy\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2022-07-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Powder Metallurgy\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1080/00325899.2022.2102839\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Powder Metallurgy","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1080/00325899.2022.2102839","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
Investigation of mechanical properties and microstructure of Ti-15% Mo alloy produced by mechanical alloying and sintering with SPS (MA-SPS)
ABSTRACT The goal of this study was to investigate the mechanical properties and microstructure of Ti-15% Mo alloy fabricated using the mechanical alloying and spark plasma sintering (MA-SPS) method. Accordingly, Ti and Mo powders were milled for different times, including 5, 15, 25, 35, and 45 h, and the SPS technique for sintering under a pressure of 25 MPa at 1100°C was used. The X-ray diffraction (XRD) analysis, optical and electron microscopy (SEM), hardness measurements, and compression testing were used to study the phases formed, the morphology of powders, microstructure, and mechanical properties of the as-prepared samples, respectively. The results revealed that owing to increasing the mechanical milling time, the percentage of the beta phase formed was higher, and in addition, it influenced the microstructure and mechanical properties of the samples fabricated after the sintering process. GRAPHICAL ABSTRACT
期刊介绍:
Powder Metallurgy is an international journal publishing peer-reviewed original research on the science and practice of powder metallurgy and particulate technology. Coverage includes metallic particulate materials, PM tool materials, hard materials, composites, and novel powder based materials.