Numerical Validation of an Analytical Seal Flutter Model

An analytical model to describe the flutter onset of straight-through labyrinth seals has been numerically validated using a frequency domain linearized Navier-Stokes solver. A comprehensive set of simulations has been conducted to assess the stability criterion of the analytical model originally derived by Corral and Vega (2018), “Conceptual Flutter Analysis of Labyrinth Seals Using Analytical Models - Part I: Theoretical Support,” ASME J. Turbomach., 140 (12), pp. 121006. The accuracy of the model has been assessed by using a simplified geometry consisting of a two-fin straight-through labyrinth seal with identical gaps. The effective gaps and the kinetic energy carried over are retained and their effects on stability are evaluated. It turns out that is important to inform the model with the correct values of both parameters to allow a proper comparison with the numerical simulations. Moreover, the non-isentropic perturbations included in the formulations are observed in the simulations at relatively low frequencies whose characteristic time is of the same order as the discharge time of the seal. This effect is responsible for the bending of the stability limit in the 0th ND stability map obtained both in the model and the simulations. It turns out that the analytical model can predict accurately the stability of the seal in a wide range of pressure ratios, vibration mode-shapes, and frequencies provided that this is informed with the fluid dynamic gaps and the energy carried over to the downstream fin from a steady RANS simulation. The numerical calculations show for the first time that the model can be used to predict accurately not only the trends of the work-per-cycle of the seal but also quantitative results.