Performance Analysis of Continuous Casting System of Steel Industry

The continuous casting system is the most important to solidify the liquid steel in the steel industry. Steel is the backbone of civilization and modernization. So, there is a need to optimize the performance of continuous casting system of steel industry. Continuous casting system has six subsystems: “Pouring turret ladle”, “Tundish”, “Mold”, “Water spray chamber”, “Support roller” and “Torch cutter”. Series configuration is used to arrange these subsystems. The subsystem “Pouring turret ladle” is having three similar units. These units are operating in parallel. The subsystems “Tundish”, “Mold”, “Water spray chamber” and “Support roller” have a single unit. The subsystem “Torch cutter” contains two identical units: one is operative and other keep in cold standby. For all subsystems, the distribution of repair rates and failure rates of continuous casting system are taken as arbitrary distributions. Analysis of continuous casting system has been done by using supplementary variable technique. The numerical results of reliability measure of continuous casting system in terms of availability and profit have been computed by assuming exponential, Rayleigh and Weibull distributions.