{"title":"抗腐蚀聚合物和复合涂层的脱拉强度和耐磨性","authors":"A. Dmitruk, P. Mayer, J. Pach","doi":"10.1504/IJSURFSE.2019.10019184","DOIUrl":null,"url":null,"abstract":"The paper aims at presenting the results of pull-off strength and abrasion resistance tests for anti-corrosive coatings on steel substrates. It contains the measured data on the thickness of manufactured coatings in the function of the applied amount of abrasive material. Three polymeric coatings were subjected for testing: chlorinated rubber, oil-phthalic and alkyd. The analogous studies were repeated for composite coatings with alumina α-Al2O3 filler and subsequently also for the aged (72 h, -19°C) systems. For the pull-off tests, the damage analysis of samples after failure was performed. The highest pull-off strength's values for the produced coatings were obtained for the alkyd one. Concerning the abrasion resistance it can be stated that, the addition of a filler significantly improves the system's durability, while the aging process causes its deterioration.","PeriodicalId":14460,"journal":{"name":"International Journal of Surface Science and Engineering","volume":" ","pages":""},"PeriodicalIF":1.0000,"publicationDate":"2019-02-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Pull-off strength and abrasion resistance of anti-corrosive polymer and composite coatings\",\"authors\":\"A. Dmitruk, P. Mayer, J. Pach\",\"doi\":\"10.1504/IJSURFSE.2019.10019184\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper aims at presenting the results of pull-off strength and abrasion resistance tests for anti-corrosive coatings on steel substrates. It contains the measured data on the thickness of manufactured coatings in the function of the applied amount of abrasive material. Three polymeric coatings were subjected for testing: chlorinated rubber, oil-phthalic and alkyd. The analogous studies were repeated for composite coatings with alumina α-Al2O3 filler and subsequently also for the aged (72 h, -19°C) systems. For the pull-off tests, the damage analysis of samples after failure was performed. The highest pull-off strength's values for the produced coatings were obtained for the alkyd one. Concerning the abrasion resistance it can be stated that, the addition of a filler significantly improves the system's durability, while the aging process causes its deterioration.\",\"PeriodicalId\":14460,\"journal\":{\"name\":\"International Journal of Surface Science and Engineering\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":1.0000,\"publicationDate\":\"2019-02-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Surface Science and Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1504/IJSURFSE.2019.10019184\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Surface Science and Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1504/IJSURFSE.2019.10019184","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Pull-off strength and abrasion resistance of anti-corrosive polymer and composite coatings
The paper aims at presenting the results of pull-off strength and abrasion resistance tests for anti-corrosive coatings on steel substrates. It contains the measured data on the thickness of manufactured coatings in the function of the applied amount of abrasive material. Three polymeric coatings were subjected for testing: chlorinated rubber, oil-phthalic and alkyd. The analogous studies were repeated for composite coatings with alumina α-Al2O3 filler and subsequently also for the aged (72 h, -19°C) systems. For the pull-off tests, the damage analysis of samples after failure was performed. The highest pull-off strength's values for the produced coatings were obtained for the alkyd one. Concerning the abrasion resistance it can be stated that, the addition of a filler significantly improves the system's durability, while the aging process causes its deterioration.
期刊介绍：
IJSurfSE publishes refereed quality papers in the broad field of surface science and engineering including tribology, but with a special emphasis on the research and development in friction, wear, coatings and surface modification processes such as surface treatment, cladding, machining, polishing and grinding, across multiple scales from nanoscopic to macroscopic dimensions. High-integrity and high-performance surfaces of components have become a central research area in the professional community whose aim is to develop highly reliable ultra-precision devices.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
