On the acoustic transparency of perforated metal plates facing a porous fibrous material

Abstract Thin impervious layers, cloths or perforated plates are usually utilized with fibrous absorbing materials in order to avoid small particles, coming from deterioration over time or from flow abrasive effect, becoming dislodged and polluting the environment. These protective facings are to be carefully considered and analyzed, since they can affect the acoustical behavior of the “backing” material. This study addresses this issue through an experimental survey and a theoretical analysis using the Transfer Matrix Method (TMM). Experiments have been performed in the frequency range 160–2,500 Hz, analyzing the different behaviors due to multiple combinations of percentage of open area and air gap between perforated facing and absorbing material. Experimental data have shown a marked effect of the percentage of perforation, at least up to a threshold value of 20%, whereas the air gap slightly affected the acoustic behavior of the covered absorbing material. The TMM was applied to the tested faced absorbing system, and experimental and theoretical results were compared, showing the good accuracy of the model. Several geometrical configurations were then modeled through TMM and the possibility of using this method in order to assess the acoustic transparency of perforated metal plates was assessed.