Control of the operational properties of powder materials to increase the corrosion resistance and wear resistance of parts

Introduction. One of the vibration methods for processing loose finely dispersed mineral raw materials is the sepIntroduction. The quality of powder materials made of rare metals is ensured by chemical-thermal treatment, including diffusion chromosilidation. Chemical and thermal treatment of products intensifies the process of diffusion saturation, reduces the processing time and allows the use of products in aggressive and abrasive environments. Methods and materials of research. Systematization, generalization and analysis of theoretical, laboratory and experimental studies, the basis of which is the modeling of processes. Research results. It was found that when using low-alloyed powder, higher strength and viscosity indices of chromosilicated materials were obtained. It is determined that the mechanical properties of powders processed from molten salts are higher than those of materials from powder filling. It is shown that the treatment increases the corrosion resistance of iron-based powders with an established corrosion rate less than the initial one. Discussion of research results. The rapid formation of an oxide film that protects the metal from corrosion is facilitated by quenching and normalization. Porous chromosilicated layers are destroyed and impair the ability of the material to resist corrosion destruction. The operational properties of chromosilicated powders obtained by hot stamping methods increase when using rational parameters of the technological process in an optimal mode. Conclusion. The article contains new proposals for managing the properties of materials to increase corrosion resistance and wear resistance of children. Conclusions on the article. New developments can be recommended for implementation in the production of rare metals and products made from them. Suggestions. The results of the research can be used both in the modernization of production and in the training of specialists in this field.