Design Theory of Equal Split Dual- Band Power Divider without Reactive Elements

In this paper, a design approach for getting dual-band working in a Wilkinson-based power divider (WPD) without adding any reactive elements or open- or short-circuited stubs is presented. The transfer matrix approach is used to get the analytical solutions of the required design equations. Admittance representation with respect to the input and output ports is done to perform even-odd mode analysis. In this impedance of each section is kept constant but the electrical length varies. Different combinations of electrical lengths are taken such that the overall length remains constant. The electrical lengths are selected based on dual-band analysis and depend on the tuning ratio. The conditions for attaining the impedance matching are applied to the obtained design equations and hence found out the values of the matching resistors to be placed between the transmission line sections. The proposed power divider centered at 2.5GHz and 7GHz is theoretically calculated simulated and fabricated. Finally, design procedures and experiments show good agreement with theoretical simulation.