Long-term durability tests of andesite aggregates from Hungary

The Micro-Deval test method is used for testing of aggregate durability. The present paper focuses on two Hungarian andesites obtained from the quarries of Recsk (Matra Mountains, Hungary) and of Nogradkovesd (Cserhat Mountains, Hungary). The aim of this study is to find a simple test method based on the original Micro-Deval test method to assess the long-term durability of aggregates. An additional part of the research was to develop suitable mathematical models that can describe the behavior of the andesite aggregates under continuous abrasive impact. The relevant standard (EN 1097-1:2012) recommends 12,000 rotations to determine the Micro-Deval coefficient required for classification of the aggregates. Within the framework of this research, a modified Micro-Deval test was applied: the number of rotations was increased in several steps and the degree of abrasion was measured afterwards. Regression analyses were used to outline mathematical forms which characterize the dependence between the number of rotations and the degree of abrasion. According to the results, the long-term Micro-Deval tests significantly modify the assessed durability and thus provide information on the long-term abrasive impact. The degree of change depends on the studied material: the ratio of the long-term Micro-Deval coefficients of the two studied andesite types is larger than 3. The regression analyses of the measured Micro-Deval coefficients revealed that quadratic curves are suitable to describe these tendencies for both andesite aggregates.