N. Sivanandham, A. Rajadurai, S. M. Shariff, J. Senthilselvan, A. Mahalingam
{"title":"激光表面熔化EN353低碳低合金钢的组织、力学性能和耐蚀性","authors":"N. Sivanandham, A. Rajadurai, S. M. Shariff, J. Senthilselvan, A. Mahalingam","doi":"10.1504/IJSURFSE.2017.10005740","DOIUrl":null,"url":null,"abstract":"The efficacy of laser surface modification of EN353 low carbon low alloy steel is studied and discussed. The high power diode laser (HPDL) treated layers were characterised by means of high resolution scanning electron microscopy (HRSEM), and X-ray diffractometer (XRD). The mechanical properties like hardness, wear and corrosion resistance were studied. The hardness profile of the laser modified cross-sectional layer was determined by using Vickers hardness tester. It was found that the microhardness improved to as high as 493 HV as compared to 215 HV of the substrate material. The laser surface melting by the HPDL resulted of martensite and bainite microstructure in low carbon low alloy steel. XRD phase analysis indicated the formation of martensite, Fe-Mn-C, Fe-Cr-C and M23C6 carbide phases at near surface regions of laser treated samples. The wear resistance of the laser surface melted EN353 steel was also found to be increased. Potentiodynamic electrochemical corrosion method revealed an improved corrosion resistance in the laser treated layers.","PeriodicalId":14460,"journal":{"name":"International Journal of Surface Science and Engineering","volume":"11 1","pages":"118"},"PeriodicalIF":1.0000,"publicationDate":"2017-06-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Microstructure, mechanical properties and corrosion resistance of laser surface melted EN353 low carbon low alloy steel\",\"authors\":\"N. Sivanandham, A. Rajadurai, S. M. Shariff, J. Senthilselvan, A. Mahalingam\",\"doi\":\"10.1504/IJSURFSE.2017.10005740\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The efficacy of laser surface modification of EN353 low carbon low alloy steel is studied and discussed. The high power diode laser (HPDL) treated layers were characterised by means of high resolution scanning electron microscopy (HRSEM), and X-ray diffractometer (XRD). The mechanical properties like hardness, wear and corrosion resistance were studied. The hardness profile of the laser modified cross-sectional layer was determined by using Vickers hardness tester. It was found that the microhardness improved to as high as 493 HV as compared to 215 HV of the substrate material. The laser surface melting by the HPDL resulted of martensite and bainite microstructure in low carbon low alloy steel. XRD phase analysis indicated the formation of martensite, Fe-Mn-C, Fe-Cr-C and M23C6 carbide phases at near surface regions of laser treated samples. The wear resistance of the laser surface melted EN353 steel was also found to be increased. Potentiodynamic electrochemical corrosion method revealed an improved corrosion resistance in the laser treated layers.\",\"PeriodicalId\":14460,\"journal\":{\"name\":\"International Journal of Surface Science and Engineering\",\"volume\":\"11 1\",\"pages\":\"118\"},\"PeriodicalIF\":1.0000,\"publicationDate\":\"2017-06-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Surface Science and Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1504/IJSURFSE.2017.10005740\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Surface Science and Engineering","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1504/IJSURFSE.2017.10005740","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Microstructure, mechanical properties and corrosion resistance of laser surface melted EN353 low carbon low alloy steel
The efficacy of laser surface modification of EN353 low carbon low alloy steel is studied and discussed. The high power diode laser (HPDL) treated layers were characterised by means of high resolution scanning electron microscopy (HRSEM), and X-ray diffractometer (XRD). The mechanical properties like hardness, wear and corrosion resistance were studied. The hardness profile of the laser modified cross-sectional layer was determined by using Vickers hardness tester. It was found that the microhardness improved to as high as 493 HV as compared to 215 HV of the substrate material. The laser surface melting by the HPDL resulted of martensite and bainite microstructure in low carbon low alloy steel. XRD phase analysis indicated the formation of martensite, Fe-Mn-C, Fe-Cr-C and M23C6 carbide phases at near surface regions of laser treated samples. The wear resistance of the laser surface melted EN353 steel was also found to be increased. Potentiodynamic electrochemical corrosion method revealed an improved corrosion resistance in the laser treated layers.
期刊介绍：
IJSurfSE publishes refereed quality papers in the broad field of surface science and engineering including tribology, but with a special emphasis on the research and development in friction, wear, coatings and surface modification processes such as surface treatment, cladding, machining, polishing and grinding, across multiple scales from nanoscopic to macroscopic dimensions. High-integrity and high-performance surfaces of components have become a central research area in the professional community whose aim is to develop highly reliable ultra-precision devices.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
