M. Chernets, S. Shil’ko, A. Kornienko, M. Pashechko
{"title":"基于聚酰胺的金属-聚合物滑动轴承减摩材料摩擦学分析","authors":"M. Chernets, S. Shil’ko, A. Kornienko, M. Pashechko","doi":"10.3103/S1068366623020034","DOIUrl":null,"url":null,"abstract":"<p>An experimental and theoretical method of triboanalysis is proposed to characterize the antifriction properties of polyamides and composites based on them, used in self-lubricated metal-polymer sliding bearings. The indicators of wear resistance of the materials are determined experimentally. The generalized parameters of the mathematical model of wear used in the design of metal-polymer bearings are calculated. The dependences (diagrams) of wear resistance of unfilled polyamides PA6, PA66, and polyamide composites PA6 + 30GF, PA6 + 30CF, PA6 + MoS<sub>2</sub>, and PA6 + oil paired with steel 45 on specific friction force are obtained and a comparative assessment of the wear resistance is given. The influence of contact pressure on the friction coefficient is studied and a significant decrease in the latter with increasing contact pressure is shown. A decrease in the Vickers hardness and elastic modulus of the surface layer of the studied materials during wear is also established. It is more significant for unfilled polyamide PA66 (by 1.66 times), PA6 + 30CF (by 1.5 times), PA6 + MoS<sub>2</sub> (by 1.41 times), and less noticeable for polymer composites PA6 + 30GF and PA6 + oil by 1.21 and 1.09 times, respectively. The fact should be taken into account in tribological calculations of metal-polymer sliding bearings. The research results are presented in the form of diagrams, which allow one to compare the wear resistance of the investigative materials in a wide range of specific friction forces. Thus, the practical significance of the results lies in the possibility of their use in tribological engineering to predict the service life of metal-polymer plain bearings and validate the choice of antifriction materials for their manufacturing.</p>","PeriodicalId":633,"journal":{"name":"Journal of Friction and Wear","volume":"44 2","pages":"63 - 70"},"PeriodicalIF":0.5000,"publicationDate":"2023-08-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings\",\"authors\":\"M. Chernets, S. Shil’ko, A. Kornienko, M. Pashechko\",\"doi\":\"10.3103/S1068366623020034\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>An experimental and theoretical method of triboanalysis is proposed to characterize the antifriction properties of polyamides and composites based on them, used in self-lubricated metal-polymer sliding bearings. The indicators of wear resistance of the materials are determined experimentally. The generalized parameters of the mathematical model of wear used in the design of metal-polymer bearings are calculated. The dependences (diagrams) of wear resistance of unfilled polyamides PA6, PA66, and polyamide composites PA6 + 30GF, PA6 + 30CF, PA6 + MoS<sub>2</sub>, and PA6 + oil paired with steel 45 on specific friction force are obtained and a comparative assessment of the wear resistance is given. The influence of contact pressure on the friction coefficient is studied and a significant decrease in the latter with increasing contact pressure is shown. A decrease in the Vickers hardness and elastic modulus of the surface layer of the studied materials during wear is also established. It is more significant for unfilled polyamide PA66 (by 1.66 times), PA6 + 30CF (by 1.5 times), PA6 + MoS<sub>2</sub> (by 1.41 times), and less noticeable for polymer composites PA6 + 30GF and PA6 + oil by 1.21 and 1.09 times, respectively. The fact should be taken into account in tribological calculations of metal-polymer sliding bearings. The research results are presented in the form of diagrams, which allow one to compare the wear resistance of the investigative materials in a wide range of specific friction forces. Thus, the practical significance of the results lies in the possibility of their use in tribological engineering to predict the service life of metal-polymer plain bearings and validate the choice of antifriction materials for their manufacturing.</p>\",\"PeriodicalId\":633,\"journal\":{\"name\":\"Journal of Friction and Wear\",\"volume\":\"44 2\",\"pages\":\"63 - 70\"},\"PeriodicalIF\":0.5000,\"publicationDate\":\"2023-08-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Friction and Wear\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.3103/S1068366623020034\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENGINEERING, MECHANICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Friction and Wear","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.3103/S1068366623020034","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENGINEERING, MECHANICAL","Score":null,"Total":0}
Triboanalysis of Antifrictional Materials Based on Polyamides for Metal-Polymer Sliding Bearings
An experimental and theoretical method of triboanalysis is proposed to characterize the antifriction properties of polyamides and composites based on them, used in self-lubricated metal-polymer sliding bearings. The indicators of wear resistance of the materials are determined experimentally. The generalized parameters of the mathematical model of wear used in the design of metal-polymer bearings are calculated. The dependences (diagrams) of wear resistance of unfilled polyamides PA6, PA66, and polyamide composites PA6 + 30GF, PA6 + 30CF, PA6 + MoS2, and PA6 + oil paired with steel 45 on specific friction force are obtained and a comparative assessment of the wear resistance is given. The influence of contact pressure on the friction coefficient is studied and a significant decrease in the latter with increasing contact pressure is shown. A decrease in the Vickers hardness and elastic modulus of the surface layer of the studied materials during wear is also established. It is more significant for unfilled polyamide PA66 (by 1.66 times), PA6 + 30CF (by 1.5 times), PA6 + MoS2 (by 1.41 times), and less noticeable for polymer composites PA6 + 30GF and PA6 + oil by 1.21 and 1.09 times, respectively. The fact should be taken into account in tribological calculations of metal-polymer sliding bearings. The research results are presented in the form of diagrams, which allow one to compare the wear resistance of the investigative materials in a wide range of specific friction forces. Thus, the practical significance of the results lies in the possibility of their use in tribological engineering to predict the service life of metal-polymer plain bearings and validate the choice of antifriction materials for their manufacturing.
期刊介绍:
Journal of Friction and Wear is intended to bring together researchers and practitioners working in tribology. It provides novel information on science, practice, and technology of lubrication, wear prevention, and friction control. Papers cover tribological problems of physics, chemistry, materials science, and mechanical engineering, discussing issues from a fundamental or technological point of view.