Luis Montenegro , Javier Samper , Alba Mon , Laurent De Windt , Aurora-Core Samper , Enrique García
{"title":"花岗岩高放废物库处置池规模长期地球化学演化的非等温反应迁移模型","authors":"Luis Montenegro , Javier Samper , Alba Mon , Laurent De Windt , Aurora-Core Samper , Enrique García","doi":"10.1016/j.clay.2023.107018","DOIUrl":null,"url":null,"abstract":"<div><p>The assessment of the long-term performance of the engineered barrier systems of high-level radioactive waste (HLW) repositories requires the use of reactive transport models. Here a non-isothermal reactive transport model of the long-term geochemical evolution of a HLW disposal cell in a granitic host rock is presented. The model includes the vitrified waste (40 cm in diameter), the carbon-steel canister (5 cm thick), the saturated FEBEX bentonite buffer (75 cm thick) and the reference granitic rock. The model accounts for the thermal transient stage and assumes generalized steel corrosion under anaerobic conditions with a corrosion rate equal to 1.41 m/y. Canister failure is assumed to occur when the remaining canister thickness is equal to 3.5 cm at <em>t</em> = 25,000 years. Canister corrosion caused an increase in pH. The computed pH in the canister just before canister failure (<em>t</em> = 25,000 years) was equal to 9.25 and ranged from 7.82 to 9.25 in the bentonite. Magnetite, the main corrosion product, precipitated in the bentonite and especially in the canister. The thickness of magnetite precipitation band in the bentonite was <span><math><mo>≈</mo></math></span> 1 cm. Siderite precipitated at both sides of the canister/bentonite interface. The precipitation front penetrated >1 cm into the bentonite. Nuclear glass started dissolving after canister failure (<em>t</em> > 25,000 years). The concentration of dissolved silica increased in the inner part of the glass until <em>t</em> = 30,000 years and decreased in the outer part of the glass due to the out diffusion of dissolved silica into the canister and the bentonite. This diffusive flux caused the precipitation of greenalite at the glass/canister and canister/bentonite interfaces. The pH at the end of the simulation (<em>t</em> = 50,000 years) ranged from 7.93 to 7.89 in the glass, from 7.89 to 8.66 in the canister and from 7.87 to 8.6 in the bentonite. Magnetite precipitated in the canister while there was carbon steel to corrode. Once the canister was fully corroded, magnetite redissolved near the glass/canister interface. Greenalite precipitated in the canister and the bentonite, especially at the glass/canister interface and siderite precipitated at the canister/bentonite interface. The simulation results should be useful for the performance assessment of engineered barriers of radioactive waste repositories in granitic host rocks.</p></div>","PeriodicalId":245,"journal":{"name":"Applied Clay Science","volume":"242 ","pages":"Article 107018"},"PeriodicalIF":5.3000,"publicationDate":"2023-09-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S0169131723002053/pdfft?md5=3feddd25f3ab6c960e54bd798b26323f&pid=1-s2.0-S0169131723002053-main.pdf","citationCount":"1","resultStr":"{\"title\":\"A non-isothermal reactive transport model of the long-term geochemical evolution at the disposal cell scale in a HLW repository in granite\",\"authors\":\"Luis Montenegro , Javier Samper , Alba Mon , Laurent De Windt , Aurora-Core Samper , Enrique García\",\"doi\":\"10.1016/j.clay.2023.107018\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The assessment of the long-term performance of the engineered barrier systems of high-level radioactive waste (HLW) repositories requires the use of reactive transport models. Here a non-isothermal reactive transport model of the long-term geochemical evolution of a HLW disposal cell in a granitic host rock is presented. The model includes the vitrified waste (40 cm in diameter), the carbon-steel canister (5 cm thick), the saturated FEBEX bentonite buffer (75 cm thick) and the reference granitic rock. The model accounts for the thermal transient stage and assumes generalized steel corrosion under anaerobic conditions with a corrosion rate equal to 1.41 m/y. Canister failure is assumed to occur when the remaining canister thickness is equal to 3.5 cm at <em>t</em> = 25,000 years. Canister corrosion caused an increase in pH. The computed pH in the canister just before canister failure (<em>t</em> = 25,000 years) was equal to 9.25 and ranged from 7.82 to 9.25 in the bentonite. Magnetite, the main corrosion product, precipitated in the bentonite and especially in the canister. The thickness of magnetite precipitation band in the bentonite was <span><math><mo>≈</mo></math></span> 1 cm. Siderite precipitated at both sides of the canister/bentonite interface. The precipitation front penetrated >1 cm into the bentonite. Nuclear glass started dissolving after canister failure (<em>t</em> > 25,000 years). The concentration of dissolved silica increased in the inner part of the glass until <em>t</em> = 30,000 years and decreased in the outer part of the glass due to the out diffusion of dissolved silica into the canister and the bentonite. This diffusive flux caused the precipitation of greenalite at the glass/canister and canister/bentonite interfaces. The pH at the end of the simulation (<em>t</em> = 50,000 years) ranged from 7.93 to 7.89 in the glass, from 7.89 to 8.66 in the canister and from 7.87 to 8.6 in the bentonite. Magnetite precipitated in the canister while there was carbon steel to corrode. Once the canister was fully corroded, magnetite redissolved near the glass/canister interface. Greenalite precipitated in the canister and the bentonite, especially at the glass/canister interface and siderite precipitated at the canister/bentonite interface. The simulation results should be useful for the performance assessment of engineered barriers of radioactive waste repositories in granitic host rocks.</p></div>\",\"PeriodicalId\":245,\"journal\":{\"name\":\"Applied Clay Science\",\"volume\":\"242 \",\"pages\":\"Article 107018\"},\"PeriodicalIF\":5.3000,\"publicationDate\":\"2023-09-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S0169131723002053/pdfft?md5=3feddd25f3ab6c960e54bd798b26323f&pid=1-s2.0-S0169131723002053-main.pdf\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Clay Science\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0169131723002053\",\"RegionNum\":2,\"RegionCategory\":\"地球科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Clay Science","FirstCategoryId":"89","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0169131723002053","RegionNum":2,"RegionCategory":"地球科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
A non-isothermal reactive transport model of the long-term geochemical evolution at the disposal cell scale in a HLW repository in granite
The assessment of the long-term performance of the engineered barrier systems of high-level radioactive waste (HLW) repositories requires the use of reactive transport models. Here a non-isothermal reactive transport model of the long-term geochemical evolution of a HLW disposal cell in a granitic host rock is presented. The model includes the vitrified waste (40 cm in diameter), the carbon-steel canister (5 cm thick), the saturated FEBEX bentonite buffer (75 cm thick) and the reference granitic rock. The model accounts for the thermal transient stage and assumes generalized steel corrosion under anaerobic conditions with a corrosion rate equal to 1.41 m/y. Canister failure is assumed to occur when the remaining canister thickness is equal to 3.5 cm at t = 25,000 years. Canister corrosion caused an increase in pH. The computed pH in the canister just before canister failure (t = 25,000 years) was equal to 9.25 and ranged from 7.82 to 9.25 in the bentonite. Magnetite, the main corrosion product, precipitated in the bentonite and especially in the canister. The thickness of magnetite precipitation band in the bentonite was 1 cm. Siderite precipitated at both sides of the canister/bentonite interface. The precipitation front penetrated >1 cm into the bentonite. Nuclear glass started dissolving after canister failure (t > 25,000 years). The concentration of dissolved silica increased in the inner part of the glass until t = 30,000 years and decreased in the outer part of the glass due to the out diffusion of dissolved silica into the canister and the bentonite. This diffusive flux caused the precipitation of greenalite at the glass/canister and canister/bentonite interfaces. The pH at the end of the simulation (t = 50,000 years) ranged from 7.93 to 7.89 in the glass, from 7.89 to 8.66 in the canister and from 7.87 to 8.6 in the bentonite. Magnetite precipitated in the canister while there was carbon steel to corrode. Once the canister was fully corroded, magnetite redissolved near the glass/canister interface. Greenalite precipitated in the canister and the bentonite, especially at the glass/canister interface and siderite precipitated at the canister/bentonite interface. The simulation results should be useful for the performance assessment of engineered barriers of radioactive waste repositories in granitic host rocks.
期刊介绍:
Applied Clay Science aims to be an international journal attracting high quality scientific papers on clays and clay minerals, including research papers, reviews, and technical notes. The journal covers typical subjects of Fundamental and Applied Clay Science such as:
• Synthesis and purification
• Structural, crystallographic and mineralogical properties of clays and clay minerals
• Thermal properties of clays and clay minerals
• Physico-chemical properties including i) surface and interface properties; ii) thermodynamic properties; iii) mechanical properties
• Interaction with water, with polar and apolar molecules
• Colloidal properties and rheology
• Adsorption, Intercalation, Ionic exchange
• Genesis and deposits of clay minerals
• Geology and geochemistry of clays
• Modification of clays and clay minerals properties by thermal and physical treatments
• Modification by chemical treatments with organic and inorganic molecules(organoclays, pillared clays)
• Modification by biological microorganisms. etc...