NUMERICAL INVESTIGATIONS ON THE FREE SURFACE FLOW AROUND WING-BODY JUNCTIONS

Starting with January 2013, all ships greater than 400 tons engaged in international voyages must comply with the Energy Efficiency Design Index (EEDI), and starting with January 2023 also with the Efficiency Existing Ship Index (EEXI), issued by the International Maritime Organization, (IMO). Knowing that, in general, a ship hull is the result of a compromise between the main dimensions imposed by the size of the locks, navigation route depth, port depth, taxes, transport capacity (deadweight, volume), ship equipment (machinery, deck installations, piping systems), hydrostatic performances and last but not least the hydrodynamic performances, from ship hydrodynamics point of view the available approaches are the optimization of the ship size and hull forms or the design of propellers adapted to the ship's wake. The main purpose is to reduce the ship resistance and increase the efficiency of the propulsion system which ultimately leads to a reduction in the power placed on board the ship. For this, there can be used the so-called flow control devices or Energy Saving Devices (ESD hereafter), as hydrofoils or nozzles, to improve the flow parameters entering the propeller disc in order to increase the efficiency of the propulsion system and decreasing the fuel consumption leading to reducing of the carbon and greenhouse gasses emissions. For ballast loading condition the ESD may intersect the free surface, the flow becoming complicated and combining nonlinear, three-dimensional and turbulent phenomena such as the boundary layer on solid surfaces, the horseshoe vortex system developed around junctions and their effects turbulence, and also wave breaking. Therefore, this paper presents the results of the numerical study on the viscous free surface flow around junctions between a hydrofoil mounted on a plate, more precisely the study of the influence of the angle between hydrofoil and plate. It was observed that from a hydrodynamic point of view the angle between hydrofoil and base plate to be less than 15 degrees in respect to the vertical direction on the hydrofoil so that horseshoe vortex to be reduced in intensity and the value of the hydrofoil drag to be minimal.