Luďka Hanincová, J. Procházka, V. Novák, Z. Kopecký
{"title":"含水率对云杉和橡木切削参数及断裂特性的影响","authors":"Luďka Hanincová, J. Procházka, V. Novák, Z. Kopecký","doi":"10.5552/drvind.2022.0026","DOIUrl":null,"url":null,"abstract":"The objective of this study was to determine the effect of the moisture content on cutting parameters and fracture characteristics of spruce and oak wood. Samples of Norway spruce (Picea abies (L.) H. Karst.) and English oak (Quercus robur L.) were dried to required moisture content and then used for the machinability test on circular sawblade machine. Results indicate that cutting force and feed force increase with increasing moisture content up to the fiber saturation point (FSP). When the moisture content increases above the FSP, the minimum values of cutting and feed force are achieved. Based on performed experiments, the fracture toughness and shear yield strength were derived. Fracture toughness decreases with increasing moisture content. The minimum values of fracture toughness are achieved at the moisture content level above the FSP. Shear yield strength decreases linearly with increasing moisture content: the decrease is up to 17 % compared to samples with moisture content at the FSP. Based on calculated results, the influence of moisture content and wood species on cutting and fracture characteristics was discussed.","PeriodicalId":11427,"journal":{"name":"Drvna Industrija","volume":" ","pages":""},"PeriodicalIF":0.7000,"publicationDate":"2022-07-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood\",\"authors\":\"Luďka Hanincová, J. Procházka, V. Novák, Z. Kopecký\",\"doi\":\"10.5552/drvind.2022.0026\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The objective of this study was to determine the effect of the moisture content on cutting parameters and fracture characteristics of spruce and oak wood. Samples of Norway spruce (Picea abies (L.) H. Karst.) and English oak (Quercus robur L.) were dried to required moisture content and then used for the machinability test on circular sawblade machine. Results indicate that cutting force and feed force increase with increasing moisture content up to the fiber saturation point (FSP). When the moisture content increases above the FSP, the minimum values of cutting and feed force are achieved. Based on performed experiments, the fracture toughness and shear yield strength were derived. Fracture toughness decreases with increasing moisture content. The minimum values of fracture toughness are achieved at the moisture content level above the FSP. Shear yield strength decreases linearly with increasing moisture content: the decrease is up to 17 % compared to samples with moisture content at the FSP. Based on calculated results, the influence of moisture content and wood species on cutting and fracture characteristics was discussed.\",\"PeriodicalId\":11427,\"journal\":{\"name\":\"Drvna Industrija\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.7000,\"publicationDate\":\"2022-07-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Drvna Industrija\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.5552/drvind.2022.0026\",\"RegionNum\":4,\"RegionCategory\":\"农林科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, PAPER & WOOD\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Drvna Industrija","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.5552/drvind.2022.0026","RegionNum":4,"RegionCategory":"农林科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, PAPER & WOOD","Score":null,"Total":0}
Influence of Moisture Content on Cutting Parameters and Fracture Characteristics of Spruce and Oak Wood
The objective of this study was to determine the effect of the moisture content on cutting parameters and fracture characteristics of spruce and oak wood. Samples of Norway spruce (Picea abies (L.) H. Karst.) and English oak (Quercus robur L.) were dried to required moisture content and then used for the machinability test on circular sawblade machine. Results indicate that cutting force and feed force increase with increasing moisture content up to the fiber saturation point (FSP). When the moisture content increases above the FSP, the minimum values of cutting and feed force are achieved. Based on performed experiments, the fracture toughness and shear yield strength were derived. Fracture toughness decreases with increasing moisture content. The minimum values of fracture toughness are achieved at the moisture content level above the FSP. Shear yield strength decreases linearly with increasing moisture content: the decrease is up to 17 % compared to samples with moisture content at the FSP. Based on calculated results, the influence of moisture content and wood species on cutting and fracture characteristics was discussed.
期刊介绍：
"Drvna industrija" ("Wood Industry") journal publishes original scientific and review papers, short notes, professional papers, conference papers, reports, professional information, bibliographical and survey articles and general notes relating to the forestry exploitation, biology, chemistry, physics and technology of wood, pulp and paper and wood components, including production, management and marketing aspects in the woodworking industry.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
