超高强度钢Aermet100的试验研究及疲劳寿命预测

IF 0.6 4区 工程技术 Q4 MECHANICS Mechanika Pub Date : 2022-04-15 DOI:10.5755/j02.mech.29302
Enze Zhu, Hu Chen, Xingbo Fang, Hong-Bin Nie
{"title":"超高强度钢Aermet100的试验研究及疲劳寿命预测","authors":"Enze Zhu, Hu Chen, Xingbo Fang, Hong-Bin Nie","doi":"10.5755/j02.mech.29302","DOIUrl":null,"url":null,"abstract":"This study concentrates on the fatigue performance of ultra-high-strength steel Aermet100 under different loading rates. The standard specimen measured the static mechanical properties of Aermet100 steel, based on which the basic mechanical properties and fracture characteristics of the sample before and after necking was obtained. To take the strain rate effect into account, this study uses the dynamic constitutive model Johnson-Cook. The equation parameters are fitted through dynamic mechanical tests and quasi-static tests. This model is input into ABAQUS user-defined program afterward. Referring to the work done above, along with the extended finite element method (XFEM), this study establishes the dynamic fracture finite element model of the Aermet100 steel specimen on the basis of the continuous damage mechanics. Five groups of specimen fatigue tests were carried out in the laboratory. Simulation results show the feasibility and accuracy of the integrated XFEM model with the same loading and boundary conditions. The experimental data and simulation results prove that, in the loading time range of 0.0001 ~ 1s, the life cycles increase as the loading rate increases. It is worth mentioning that when the loading time is in the order of 0.0001s, the life changes significantly.","PeriodicalId":54741,"journal":{"name":"Mechanika","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2022-04-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experimental Research and Fatigue Life Prediction of Ultra-High-Strength Steel Aermet100\",\"authors\":\"Enze Zhu, Hu Chen, Xingbo Fang, Hong-Bin Nie\",\"doi\":\"10.5755/j02.mech.29302\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study concentrates on the fatigue performance of ultra-high-strength steel Aermet100 under different loading rates. The standard specimen measured the static mechanical properties of Aermet100 steel, based on which the basic mechanical properties and fracture characteristics of the sample before and after necking was obtained. To take the strain rate effect into account, this study uses the dynamic constitutive model Johnson-Cook. The equation parameters are fitted through dynamic mechanical tests and quasi-static tests. This model is input into ABAQUS user-defined program afterward. Referring to the work done above, along with the extended finite element method (XFEM), this study establishes the dynamic fracture finite element model of the Aermet100 steel specimen on the basis of the continuous damage mechanics. Five groups of specimen fatigue tests were carried out in the laboratory. Simulation results show the feasibility and accuracy of the integrated XFEM model with the same loading and boundary conditions. The experimental data and simulation results prove that, in the loading time range of 0.0001 ~ 1s, the life cycles increase as the loading rate increases. It is worth mentioning that when the loading time is in the order of 0.0001s, the life changes significantly.\",\"PeriodicalId\":54741,\"journal\":{\"name\":\"Mechanika\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2022-04-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Mechanika\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.5755/j02.mech.29302\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechanika","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.5755/j02.mech.29302","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MECHANICS","Score":null,"Total":0}
引用次数: 0

摘要

研究了超高强度钢Aermet100在不同加载速率下的疲劳性能。采用标准试样对Aermet100钢进行了静态力学性能测试,在此基础上得到了缩颈前后试样的基本力学性能和断裂特征。为考虑应变率效应,本研究采用动态本构模型Johnson-Cook。通过动态力学试验和准静态试验拟合了方程参数。然后将该模型输入到ABAQUS用户定义程序中。在上述工作的基础上,结合扩展有限元法(XFEM),建立了基于连续损伤力学的Aermet100钢试件动态断裂有限元模型。在实验室进行了五组试件疲劳试验。仿真结果表明,在相同载荷和边界条件下,所建立的一体化XFEM模型是可行和准确的。实验数据和仿真结果表明,在0.0001 ~ 1s加载时间范围内,寿命周期随着加载速率的增加而增加。值得一提的是,加载时间在0.0001s量级时,寿命变化明显。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Experimental Research and Fatigue Life Prediction of Ultra-High-Strength Steel Aermet100
This study concentrates on the fatigue performance of ultra-high-strength steel Aermet100 under different loading rates. The standard specimen measured the static mechanical properties of Aermet100 steel, based on which the basic mechanical properties and fracture characteristics of the sample before and after necking was obtained. To take the strain rate effect into account, this study uses the dynamic constitutive model Johnson-Cook. The equation parameters are fitted through dynamic mechanical tests and quasi-static tests. This model is input into ABAQUS user-defined program afterward. Referring to the work done above, along with the extended finite element method (XFEM), this study establishes the dynamic fracture finite element model of the Aermet100 steel specimen on the basis of the continuous damage mechanics. Five groups of specimen fatigue tests were carried out in the laboratory. Simulation results show the feasibility and accuracy of the integrated XFEM model with the same loading and boundary conditions. The experimental data and simulation results prove that, in the loading time range of 0.0001 ~ 1s, the life cycles increase as the loading rate increases. It is worth mentioning that when the loading time is in the order of 0.0001s, the life changes significantly.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Mechanika
Mechanika 物理-力学
CiteScore
1.30
自引率
0.00%
发文量
50
审稿时长
3 months
期刊介绍: The journal is publishing scientific papers dealing with the following problems: Mechanics of Solid Bodies; Mechanics of Fluids and Gases; Dynamics of Mechanical Systems; Design and Optimization of Mechanical Systems; Mechanical Technologies.
期刊最新文献
Nonlinear vibration characteristics and bifurcation control of a class of piecewise constrained systems with dynamic clearances Model Updating Based on Bayesian Theory and Improved Objective Function Design and FEM Analysis of Plastic Parts of a Tie-Rod Composite Hydraulic Cylinder Real-Time Energy Consumption Sensing System in SMT Intelligent Workshop Research on Bionic Hierarchical Optimization of Wing Based on PLSR and PSO
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1