Fracture mechanism and scratch behaviour of MWNTs reinforced 70/30 (wt/wt) PC/ABS blends and their nanocomposites

In this work, multiwalled carbon nanotubes (MWNTs) are dispersed in 70/30 (wt/wt) polycarbonate (PC)/acrylonitrile butadiene styrene (ABS) (PC70ABS30) blends and their nanocomposites by the melt-processing method. The morphology observations suggest the development of matrix-droplet morphology. There exists an interaction between MWNTs and the PC phase, which is observed from Raman spectroscopic investigation. Dynamic mechanical analysis (DMA) studies show the increase in storage modulus values depicting the stiffening effect of MWNTs, tanδ value increase depicting the energy dissipation. The flexural and impact properties increase significantly. The mechanism of flexural fracture is craze formation in the skin layer with a shear band and facets formation in the bulk region as observed from the SEM investigation of a flexural fractured surface of MWNTs reinforced PC70ABS30 blends and their nanocomposites. In addition, the deformation at the edge, river-like pattern, striation associated shear bands, craze, cavitation, and facets formation are the impact fracture mechanism as observed from SEM investigation of impact fractured surface of MWNTs reinforced PC70ABS30 blends and its nanocomposites. Scratch studies reveal the improved dispersion of MNNTs at 0.5–1 wt% in PC70ABS30 blends and their nanocomposites with a slightly higher scratch coefficient of friction and scratching force.