Z. Arifin, S. Hadi, S. Suyitno, A. Prabowo, S. D. Prasetyo
{"title":"双层染料敏化太阳能电池上ZnO纳米纤维的直接沉积表征","authors":"Z. Arifin, S. Hadi, S. Suyitno, A. Prabowo, S. D. Prasetyo","doi":"10.52571/ptq.v17.n36.2020.278_periodico36_pgs_263_277.pdf","DOIUrl":null,"url":null,"abstract":"\nSolar cells are capable of harvesting energy by converting solar heat into electrical energy through the photovoltaic process. A type of solar cell, namely dye-sensitized solar cells (DSSCs) which based on doublelayer photoanode is attracting researchers and engineers considering its characteristics, e.g., high efficiency, low cost, and available mass-production. The TiO2-ZnO double-layer semiconductor can be obtained from a nanofiber ZnO semiconductor which is deposited with a TiO2 nanoparticle semiconductor. In this study, the direct deposition method was applied using an electrospinning machine. The intention is to directly capture the liquid of electro-jet spun from PVA/Zn(Ac)2 solution onto fluorine-doped tin oxide (FTO) glass. The glass itself is coated with a TiO2 nanoparticle semiconductor. The investigation was addressed to obtain the best tip distance to the collector and the best flow rate in the electrospinning process. The subject environment was designated on the manufacturing process of nanofiber ZnO semiconductors used as double-layer DSSC photoanodes. Variations in flow rates of 3, 4, 5, 6, 7, and 8 μL/minute were applied in the observation. Furthermore, collaboration with the tip to collector distances using a variation of 3, 4, 5, 6, 7, and 8 cm was also considered in this study. Based on these parameters, the effects of the electrospinning process on the morphology of the directly deposited ZnO nanofiber semiconductor were obtained. The results showed that a flow rate of 4 μL/minute and a tip distance to the collector of 8 cm produced a small diameter and uniform morphology. This morphology allowed ZnO nanofibers to have better color absorption and electron excitation. Thus, it was directly proportional to the high efficiency of double-layer DSSCs. The performance value for the 4 μL/min discharge was 2.39%, and the performance value for the 8 cm needle tip distance to the collector was 1.61%.\n","PeriodicalId":45103,"journal":{"name":"Periodico Tche Quimica","volume":" ","pages":""},"PeriodicalIF":0.2000,"publicationDate":"2020-12-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"CHARACTERIZATION OF ZnO NANOFIBER ON DOUBLE-LAYER DYE-SENSITIZED SOLAR CELLS USING DIRECT DEPOSITION METHOD\",\"authors\":\"Z. Arifin, S. Hadi, S. Suyitno, A. Prabowo, S. D. Prasetyo\",\"doi\":\"10.52571/ptq.v17.n36.2020.278_periodico36_pgs_263_277.pdf\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\nSolar cells are capable of harvesting energy by converting solar heat into electrical energy through the photovoltaic process. A type of solar cell, namely dye-sensitized solar cells (DSSCs) which based on doublelayer photoanode is attracting researchers and engineers considering its characteristics, e.g., high efficiency, low cost, and available mass-production. The TiO2-ZnO double-layer semiconductor can be obtained from a nanofiber ZnO semiconductor which is deposited with a TiO2 nanoparticle semiconductor. In this study, the direct deposition method was applied using an electrospinning machine. The intention is to directly capture the liquid of electro-jet spun from PVA/Zn(Ac)2 solution onto fluorine-doped tin oxide (FTO) glass. The glass itself is coated with a TiO2 nanoparticle semiconductor. The investigation was addressed to obtain the best tip distance to the collector and the best flow rate in the electrospinning process. The subject environment was designated on the manufacturing process of nanofiber ZnO semiconductors used as double-layer DSSC photoanodes. Variations in flow rates of 3, 4, 5, 6, 7, and 8 μL/minute were applied in the observation. Furthermore, collaboration with the tip to collector distances using a variation of 3, 4, 5, 6, 7, and 8 cm was also considered in this study. Based on these parameters, the effects of the electrospinning process on the morphology of the directly deposited ZnO nanofiber semiconductor were obtained. The results showed that a flow rate of 4 μL/minute and a tip distance to the collector of 8 cm produced a small diameter and uniform morphology. This morphology allowed ZnO nanofibers to have better color absorption and electron excitation. Thus, it was directly proportional to the high efficiency of double-layer DSSCs. The performance value for the 4 μL/min discharge was 2.39%, and the performance value for the 8 cm needle tip distance to the collector was 1.61%.\\n\",\"PeriodicalId\":45103,\"journal\":{\"name\":\"Periodico Tche Quimica\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.2000,\"publicationDate\":\"2020-12-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Periodico Tche Quimica\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.52571/ptq.v17.n36.2020.278_periodico36_pgs_263_277.pdf\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"CHEMISTRY, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Periodico Tche Quimica","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.52571/ptq.v17.n36.2020.278_periodico36_pgs_263_277.pdf","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"CHEMISTRY, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 2
摘要
太阳能电池能够通过光伏过程将太阳能热能转化为电能来收集能量。基于双层光阳极的染料敏化太阳能电池(dye-sensitized solar cells, DSSCs)因其效率高、成本低、可批量生产等特点而备受研究人员和工程师的青睐。将纳米纤维ZnO半导体与TiO2纳米颗粒半导体相沉积,可以得到TiO2-ZnO双层半导体。本研究在静电纺丝机上采用直接沉积法。目的是将PVA/Zn(Ac)2溶液中的电喷纺液直接捕获到掺氟氧化锡(FTO)玻璃上。玻璃本身涂有二氧化钛纳米粒子半导体。研究了静电纺丝过程中纺丝头与收集器的最佳距离和最佳流量。研究了用于双层DSSC光阳极的纳米纤维ZnO半导体的制备工艺。分别采用3、4、5、6、7、8 μL/min的流速进行观察。此外,在本研究中还考虑了使用3、4、5、6、7和8厘米的变化与尖端收集器距离的合作。基于这些参数,得到了静电纺丝工艺对直接沉积ZnO纳米纤维半导体形貌的影响。结果表明,当流速为4 μL/min,针尖与集热器的距离为8 cm时,所制备的膜直径小,形貌均匀;这种形态使得ZnO纳米纤维具有更好的吸色性和电子激发性。因此,这与双层DSSCs的高效率成正比。4 μL/min放电时的性能值为2.39%,针尖距收集器8 cm时的性能值为1.61%。
CHARACTERIZATION OF ZnO NANOFIBER ON DOUBLE-LAYER DYE-SENSITIZED SOLAR CELLS USING DIRECT DEPOSITION METHOD
Solar cells are capable of harvesting energy by converting solar heat into electrical energy through the photovoltaic process. A type of solar cell, namely dye-sensitized solar cells (DSSCs) which based on doublelayer photoanode is attracting researchers and engineers considering its characteristics, e.g., high efficiency, low cost, and available mass-production. The TiO2-ZnO double-layer semiconductor can be obtained from a nanofiber ZnO semiconductor which is deposited with a TiO2 nanoparticle semiconductor. In this study, the direct deposition method was applied using an electrospinning machine. The intention is to directly capture the liquid of electro-jet spun from PVA/Zn(Ac)2 solution onto fluorine-doped tin oxide (FTO) glass. The glass itself is coated with a TiO2 nanoparticle semiconductor. The investigation was addressed to obtain the best tip distance to the collector and the best flow rate in the electrospinning process. The subject environment was designated on the manufacturing process of nanofiber ZnO semiconductors used as double-layer DSSC photoanodes. Variations in flow rates of 3, 4, 5, 6, 7, and 8 μL/minute were applied in the observation. Furthermore, collaboration with the tip to collector distances using a variation of 3, 4, 5, 6, 7, and 8 cm was also considered in this study. Based on these parameters, the effects of the electrospinning process on the morphology of the directly deposited ZnO nanofiber semiconductor were obtained. The results showed that a flow rate of 4 μL/minute and a tip distance to the collector of 8 cm produced a small diameter and uniform morphology. This morphology allowed ZnO nanofibers to have better color absorption and electron excitation. Thus, it was directly proportional to the high efficiency of double-layer DSSCs. The performance value for the 4 μL/min discharge was 2.39%, and the performance value for the 8 cm needle tip distance to the collector was 1.61%.
期刊介绍:
The Journal publishes original research papers, review articles, short communications (scientific publications), book reviews, forum articles, announcements or letters as well as interviews. Researchers from all countries are invited to publish on its pages.