Experimental investigation for non-linear vibrations of free supported and cantilever FFF rectangular plates

The aim of this paper is to investigate experimentally the effect of large vibration of a cantilever and a fully free rectangular plate made by a Fused Filament Fabrication process. Furthermore, this investigation attempts to compare our measurements and those obtained in the literature experimentally. For this purpose, a test rig was designed and manufactured for all experimental trials. The plate was excited randomly and harmonically at large displacement respectively, to obtain the linear and non-linear frequencies parameter. The non-linear dynamic behaviour of our structure at forced vibration is figured by exciting the plate at large displacement. The dependence of frequency and amplitude vibration are examined for the first, second, and third mode shapes. The non-linear dynamic behaviour of cantilever plates is compared with literature to illustrate the convergence of our results by using our specific mechanical properties, printing parameters, and process. Furthermore, the non-dimensional comparison is shown by 33.38%, 5.83%, and 20.58% for the first, second, and third mode shapes, respectively. Experimental tests will be performed on a 3D-printed metal plate to improve the present work. This work is intended to determine the dynamic proprieties of our parts in order to manufacture a safe and comfort machine. Actually, the dynamic behaviour of our 3D printing plates is compared with the obtained in the case of the isotropic plate for the aim to predict the convergence of both structures.