磨料水射流参数对泡沫铝夹层玻璃纤维聚合物复合材料钻孔的影响

IF 0.6 4区 材料科学 Q4 MATERIALS SCIENCE, MULTIDISCIPLINARY Materiale Plastice Pub Date : 2023-07-03 DOI:10.37358/mp.23.2.5658
Madhan Kumar Subramani, Sivakumar Krishnamurthy, Chandradass Jeyaseelan
{"title":"磨料水射流参数对泡沫铝夹层玻璃纤维聚合物复合材料钻孔的影响","authors":"Madhan Kumar Subramani, Sivakumar Krishnamurthy, Chandradass Jeyaseelan","doi":"10.37358/mp.23.2.5658","DOIUrl":null,"url":null,"abstract":"To attain good geometric shape and size, machining of high-strength metal Fiber laminate becomes inevitable in the field of automotive industries. In this research, aluminum foam sandwiched with glass fiber reinforced polymer (GFRP) composites fabricated using a hand layup process. The glass Fiber composite was fabricated using aluminum foam with a thickness of 1 mm. The effect of abrasive water jet parameters such as pressure (P), stand-off distance (L), and nozzle diameter (D) on material removal rate (MRR) and Kerf angle (Ka) and Surface roughness were investigated. The results were compared without aluminum foam composites. Glass fiber composites with aluminum foam reduced the kerf angle by 44.18 %, and surface roughness (Ra) by 41.77 % as compared with glass fiber composites without aluminum foam. From the investigation, it was noticed that maximum pressure (220 Bar) and minimum stand-off distance (1mm) were optimum parameters for reducing the kerf angle and surface roughness. Also, Optical images of the hole were analyzed for surface quality.","PeriodicalId":18360,"journal":{"name":"Materiale Plastice","volume":null,"pages":null},"PeriodicalIF":0.6000,"publicationDate":"2023-07-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Abrasive Water Jet Parameters on the Drilling of Aluminum Foam Sandwiched with Glass Fiber Polymer Composites\",\"authors\":\"Madhan Kumar Subramani, Sivakumar Krishnamurthy, Chandradass Jeyaseelan\",\"doi\":\"10.37358/mp.23.2.5658\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"To attain good geometric shape and size, machining of high-strength metal Fiber laminate becomes inevitable in the field of automotive industries. In this research, aluminum foam sandwiched with glass fiber reinforced polymer (GFRP) composites fabricated using a hand layup process. The glass Fiber composite was fabricated using aluminum foam with a thickness of 1 mm. The effect of abrasive water jet parameters such as pressure (P), stand-off distance (L), and nozzle diameter (D) on material removal rate (MRR) and Kerf angle (Ka) and Surface roughness were investigated. The results were compared without aluminum foam composites. Glass fiber composites with aluminum foam reduced the kerf angle by 44.18 %, and surface roughness (Ra) by 41.77 % as compared with glass fiber composites without aluminum foam. From the investigation, it was noticed that maximum pressure (220 Bar) and minimum stand-off distance (1mm) were optimum parameters for reducing the kerf angle and surface roughness. Also, Optical images of the hole were analyzed for surface quality.\",\"PeriodicalId\":18360,\"journal\":{\"name\":\"Materiale Plastice\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.6000,\"publicationDate\":\"2023-07-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materiale Plastice\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.37358/mp.23.2.5658\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materiale Plastice","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.37358/mp.23.2.5658","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

为了获得良好的几何形状和尺寸,高强度金属纤维层压板的加工成为汽车工业领域的必然选择。在本研究中,泡沫铝夹在玻璃纤维增强聚合物(GFRP)复合材料采用手工叠层工艺。采用厚度为1mm的泡沫铝制备玻璃纤维复合材料。研究了磨料水射流压力(P)、分离距离(L)、喷嘴直径(D)等参数对材料去除率(MRR)、切口角(Ka)和表面粗糙度的影响。结果与不含泡沫铝的复合材料进行了比较。与不含泡沫铝的玻璃纤维复合材料相比,含泡沫铝的玻璃纤维复合材料的切口角减小44.18%,表面粗糙度(Ra)减小41.77%。从调查中可以看出,最大压力(220 Bar)和最小分离距离(1mm)是减小切口角和表面粗糙度的最佳参数。并对孔的光学图像进行了表面质量分析。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Effect of Abrasive Water Jet Parameters on the Drilling of Aluminum Foam Sandwiched with Glass Fiber Polymer Composites
To attain good geometric shape and size, machining of high-strength metal Fiber laminate becomes inevitable in the field of automotive industries. In this research, aluminum foam sandwiched with glass fiber reinforced polymer (GFRP) composites fabricated using a hand layup process. The glass Fiber composite was fabricated using aluminum foam with a thickness of 1 mm. The effect of abrasive water jet parameters such as pressure (P), stand-off distance (L), and nozzle diameter (D) on material removal rate (MRR) and Kerf angle (Ka) and Surface roughness were investigated. The results were compared without aluminum foam composites. Glass fiber composites with aluminum foam reduced the kerf angle by 44.18 %, and surface roughness (Ra) by 41.77 % as compared with glass fiber composites without aluminum foam. From the investigation, it was noticed that maximum pressure (220 Bar) and minimum stand-off distance (1mm) were optimum parameters for reducing the kerf angle and surface roughness. Also, Optical images of the hole were analyzed for surface quality.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Materiale Plastice
Materiale Plastice MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
1.40
自引率
25.00%
发文量
99
审稿时长
6-12 weeks
期刊介绍: Materiale Plastice, abbreviated as Mater. Plast., publishes original scientific papers or guest reviews on topics of great interest. The Journal does not publish memos, technical reports or non-original papers (that are a compiling of literature data) or papers that have been already published in other national or foreign Journal.
期刊最新文献
Experimental Analysis of Hyperelastic Materials Using the Vibration Method Impact of Aligned Carbon Nanotubes on the Mechanical Properties and Sensing Performance of EVA/CNTs Composites Influence of Biphasic Calcium Phosphate Incorporation Into Alginate Matrices In vitro Comparison of the Efficiency of Celluloid and Metallic Matrices in Proximal Restorations with a Bulk Polymer-based Biomaterial The Influence of the Delamination Location on the Bending Behavior of E-Glass Fiber EWR Flat Plates
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1