Mathematical Model for the Temperature Distribution on The Surface of Two Aluminum Alloys Welded by Friction Stir Welding

The aim of this study was to predict the temperatures on all surfaces of three-dimensional models using the ANSYS 15.0 program. Firstly, the temperatures from the welding centre to the edges of the models of two aluminium alloys (AA-7075 & AA-2024) welded by friction stir welding process were perceived. Secondly, the distribution of temperatures from the start of the welding process to its end and the derivation of equations to predict the distribution of temperatures with the time spent in the welding process, along with the distribution of temperatures with the distance from the centre of the welding process were observed at different travel speeds of the welding cart (TS = 20, 40, 60, 100 mm/sec) and different speeds of the welding tool (TRS=900, 1050, 1200 rpm). The results indicate that the temperature increases with the increase in the rotational speed of the welding tool, while the temperature decreases with the increase in the travel speed of the welding cart. Another result is that the temperature distribution is not symmetrical. The highest values are in the welding centre and decrease significantly as the welding centre is moved away, and the highest temperatures can be reached between (75 – 80%) in the welding centre from the melting point of the two aluminium alloys welded together. It was also found that the temperatures increase significantly twenty seconds after the beginning of the welding process and, afterwards, the increase is small, and three equations were derived to predict the temperature distribution.