R. Benaddi, K. E. Harfi, F. Aziz, F. Berrekhis, N. Ouazzani
{"title":"磷矿石合成纳米颗粒吸附去除合成液和炼油废水中的酚类化合物","authors":"R. Benaddi, K. E. Harfi, F. Aziz, F. Berrekhis, N. Ouazzani","doi":"10.18311/JSST/2020/23780","DOIUrl":null,"url":null,"abstract":"In this work, we studied the elimination of phenol compounds from phenolic solutions and Oil Mill Waste Water (OMWW) by adsorption method. The adsorbents used are natural phosphate rock coming from Khouribga phosphate mine (Morocco) and an Apatite synthesized from this phosphate by a dissolution–precipitation reactions. Results obtained showed that the structure of natural phosphate and synthesized apatite are respectively Ca9.55(PO4)4.96F1.96 (CO3)1.283 and (Ca10(OH)2(PO4)6). Synthesized apatite has a higher specific surface than natural phosphate (193.62m2/g). The adsorption study showed that the synthesized apatite can be used as an adsorbent to remove phenol from water with very fast reaction kinetics (about 10 min) and an adsorption capacity equal to 15mg/g. The optimal adsorption capacity was found in low values of temperature and in neutral pH. Adsorption kinetics of phenol solution on the two adsorbents can be described by an equation corresponding to a pseudo second order. Freundlich model fitted well with the adsorption isotherms more than the Langmuir model. Characterization of olive mill wastewater shows that, phenol index equal to 0.39 g/l and chemical oxygen demand COD equal to 158 g/l. The treatment of OMWW by adsorption method on the two adsorbents shows that the use of natural phosphate as adsorbent reduced phenol index by 23% and (COD) by 35% while using synthesized apatite reduced phenol index by 30% and COD by 38%.","PeriodicalId":17031,"journal":{"name":"Journal of Surface Science and Technology","volume":" ","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-08-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"6","resultStr":"{\"title\":\"Removal of Phenolic Compounds from Synthetic Solution and Oil Mill Waste Water by Adsorption onto Nanoparticles Synthesized from Phosphate Rock\",\"authors\":\"R. Benaddi, K. E. Harfi, F. Aziz, F. Berrekhis, N. Ouazzani\",\"doi\":\"10.18311/JSST/2020/23780\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this work, we studied the elimination of phenol compounds from phenolic solutions and Oil Mill Waste Water (OMWW) by adsorption method. The adsorbents used are natural phosphate rock coming from Khouribga phosphate mine (Morocco) and an Apatite synthesized from this phosphate by a dissolution–precipitation reactions. Results obtained showed that the structure of natural phosphate and synthesized apatite are respectively Ca9.55(PO4)4.96F1.96 (CO3)1.283 and (Ca10(OH)2(PO4)6). Synthesized apatite has a higher specific surface than natural phosphate (193.62m2/g). The adsorption study showed that the synthesized apatite can be used as an adsorbent to remove phenol from water with very fast reaction kinetics (about 10 min) and an adsorption capacity equal to 15mg/g. The optimal adsorption capacity was found in low values of temperature and in neutral pH. Adsorption kinetics of phenol solution on the two adsorbents can be described by an equation corresponding to a pseudo second order. Freundlich model fitted well with the adsorption isotherms more than the Langmuir model. Characterization of olive mill wastewater shows that, phenol index equal to 0.39 g/l and chemical oxygen demand COD equal to 158 g/l. The treatment of OMWW by adsorption method on the two adsorbents shows that the use of natural phosphate as adsorbent reduced phenol index by 23% and (COD) by 35% while using synthesized apatite reduced phenol index by 30% and COD by 38%.\",\"PeriodicalId\":17031,\"journal\":{\"name\":\"Journal of Surface Science and Technology\",\"volume\":\" \",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-08-20\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"6\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Surface Science and Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.18311/JSST/2020/23780\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Materials Science\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Surface Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.18311/JSST/2020/23780","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Materials Science","Score":null,"Total":0}
Removal of Phenolic Compounds from Synthetic Solution and Oil Mill Waste Water by Adsorption onto Nanoparticles Synthesized from Phosphate Rock
In this work, we studied the elimination of phenol compounds from phenolic solutions and Oil Mill Waste Water (OMWW) by adsorption method. The adsorbents used are natural phosphate rock coming from Khouribga phosphate mine (Morocco) and an Apatite synthesized from this phosphate by a dissolution–precipitation reactions. Results obtained showed that the structure of natural phosphate and synthesized apatite are respectively Ca9.55(PO4)4.96F1.96 (CO3)1.283 and (Ca10(OH)2(PO4)6). Synthesized apatite has a higher specific surface than natural phosphate (193.62m2/g). The adsorption study showed that the synthesized apatite can be used as an adsorbent to remove phenol from water with very fast reaction kinetics (about 10 min) and an adsorption capacity equal to 15mg/g. The optimal adsorption capacity was found in low values of temperature and in neutral pH. Adsorption kinetics of phenol solution on the two adsorbents can be described by an equation corresponding to a pseudo second order. Freundlich model fitted well with the adsorption isotherms more than the Langmuir model. Characterization of olive mill wastewater shows that, phenol index equal to 0.39 g/l and chemical oxygen demand COD equal to 158 g/l. The treatment of OMWW by adsorption method on the two adsorbents shows that the use of natural phosphate as adsorbent reduced phenol index by 23% and (COD) by 35% while using synthesized apatite reduced phenol index by 30% and COD by 38%.
期刊介绍:
The Indian Society for Surface Science and Technology is an organization for the cultivation, interaction and dissemination of knowledge in the field of surface science and technology. It also strives to promote Industry-Academia interaction