利用胺/氧化铝吸附剂在低温下直接捕集二氧化碳

IF 6.7 Q1 ENGINEERING, ENVIRONMENTAL ACS Environmental Au Pub Date : 2023-06-29 DOI:10.1021/acsenvironau.3c00010
Pranjali Priyadarshini, Guanhe Rim, Cornelia Rosu, MinGyu Song and Christopher W. Jones*, 
{"title":"利用胺/氧化铝吸附剂在低温下直接捕集二氧化碳","authors":"Pranjali Priyadarshini,&nbsp;Guanhe Rim,&nbsp;Cornelia Rosu,&nbsp;MinGyu Song and Christopher W. Jones*,&nbsp;","doi":"10.1021/acsenvironau.3c00010","DOIUrl":null,"url":null,"abstract":"<p >Rising CO<sub>2</sub> emissions are responsible for increasing global temperatures causing climate change. Significant efforts are underway to develop amine-based sorbents to directly capture CO<sub>2</sub> from air (called direct air capture (DAC)) to combat the effects of climate change. However, the sorbents’ performances have usually been evaluated at ambient temperatures (25 °C) or higher, most often under dry conditions. A significant portion of the natural environment where DAC plants can be deployed experiences temperatures below 25 °C, and ambient air always contains some humidity. In this study, we assess the CO<sub>2</sub> adsorption behavior of amine (poly(ethyleneimine) (PEI) and tetraethylenepentamine (TEPA)) impregnated into porous alumina at ambient (25 °C) and cold temperatures (−20 °C) under dry and humid conditions. CO<sub>2</sub> adsorption capacities at 25 °C and 400 ppm CO<sub>2</sub> are highest for 40 wt% TEPA-incorporated γ-Al<sub>2</sub>O<sub>3</sub> samples (1.8 mmol CO<sub>2</sub>/g sorbent), while 40 wt % PEI-impregnated γ-Al<sub>2</sub>O<sub>3</sub> samples exhibit moderate uptakes (0.9 mmol g<sup>–1</sup>). CO<sub>2</sub> capacities for both PEI- and TEPA-incorporated γ-Al<sub>2</sub>O<sub>3</sub> samples decrease with decreasing amine content and temperatures. The 40 and 20 wt % TEPA sorbents show the best performance at −20 °C under dry conditions (1.6 and 1.1 mmol g<sup>–1</sup>, respectively). Both the TEPA samples also exhibit stable and high working capacities (0.9 and 1.2 mmol g<sup>–1</sup>) across 10 cycles of adsorption–desorption (adsorption at −20 °C and desorption conducted at 60 °C). Introducing moisture (70% RH at −20 and 25 °C) improves the CO<sub>2</sub> capacity of the amine-impregnated sorbents at both temperatures. The 40 wt% PEI, 40 wt % TEPA, and 20 wt% TEPA samples show good CO<sub>2</sub> uptakes at both temperatures. The results presented here indicate that γ-Al<sub>2</sub>O<sub>3</sub> impregnated with PEI and TEPA are potential materials for DAC at ambient and cold conditions, with further opportunities to optimize these materials for the scalable deployment of DAC plants at different environmental conditions.</p>","PeriodicalId":29801,"journal":{"name":"ACS Environmental Au","volume":"3 5","pages":"295–307"},"PeriodicalIF":6.7000,"publicationDate":"2023-06-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://pubs.acs.org/doi/epdf/10.1021/acsenvironau.3c00010","citationCount":"1","resultStr":"{\"title\":\"Direct Air Capture of CO2 Using Amine/Alumina Sorbents at Cold Temperature\",\"authors\":\"Pranjali Priyadarshini,&nbsp;Guanhe Rim,&nbsp;Cornelia Rosu,&nbsp;MinGyu Song and Christopher W. Jones*,&nbsp;\",\"doi\":\"10.1021/acsenvironau.3c00010\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p >Rising CO<sub>2</sub> emissions are responsible for increasing global temperatures causing climate change. Significant efforts are underway to develop amine-based sorbents to directly capture CO<sub>2</sub> from air (called direct air capture (DAC)) to combat the effects of climate change. However, the sorbents’ performances have usually been evaluated at ambient temperatures (25 °C) or higher, most often under dry conditions. A significant portion of the natural environment where DAC plants can be deployed experiences temperatures below 25 °C, and ambient air always contains some humidity. In this study, we assess the CO<sub>2</sub> adsorption behavior of amine (poly(ethyleneimine) (PEI) and tetraethylenepentamine (TEPA)) impregnated into porous alumina at ambient (25 °C) and cold temperatures (−20 °C) under dry and humid conditions. CO<sub>2</sub> adsorption capacities at 25 °C and 400 ppm CO<sub>2</sub> are highest for 40 wt% TEPA-incorporated γ-Al<sub>2</sub>O<sub>3</sub> samples (1.8 mmol CO<sub>2</sub>/g sorbent), while 40 wt % PEI-impregnated γ-Al<sub>2</sub>O<sub>3</sub> samples exhibit moderate uptakes (0.9 mmol g<sup>–1</sup>). CO<sub>2</sub> capacities for both PEI- and TEPA-incorporated γ-Al<sub>2</sub>O<sub>3</sub> samples decrease with decreasing amine content and temperatures. The 40 and 20 wt % TEPA sorbents show the best performance at −20 °C under dry conditions (1.6 and 1.1 mmol g<sup>–1</sup>, respectively). Both the TEPA samples also exhibit stable and high working capacities (0.9 and 1.2 mmol g<sup>–1</sup>) across 10 cycles of adsorption–desorption (adsorption at −20 °C and desorption conducted at 60 °C). Introducing moisture (70% RH at −20 and 25 °C) improves the CO<sub>2</sub> capacity of the amine-impregnated sorbents at both temperatures. The 40 wt% PEI, 40 wt % TEPA, and 20 wt% TEPA samples show good CO<sub>2</sub> uptakes at both temperatures. The results presented here indicate that γ-Al<sub>2</sub>O<sub>3</sub> impregnated with PEI and TEPA are potential materials for DAC at ambient and cold conditions, with further opportunities to optimize these materials for the scalable deployment of DAC plants at different environmental conditions.</p>\",\"PeriodicalId\":29801,\"journal\":{\"name\":\"ACS Environmental Au\",\"volume\":\"3 5\",\"pages\":\"295–307\"},\"PeriodicalIF\":6.7000,\"publicationDate\":\"2023-06-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://pubs.acs.org/doi/epdf/10.1021/acsenvironau.3c00010\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Environmental Au\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://pubs.acs.org/doi/10.1021/acsenvironau.3c00010\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, ENVIRONMENTAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Environmental Au","FirstCategoryId":"1085","ListUrlMain":"https://pubs.acs.org/doi/10.1021/acsenvironau.3c00010","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, ENVIRONMENTAL","Score":null,"Total":0}
引用次数: 1

摘要

二氧化碳排放量的增加是全球气温上升导致气候变化的原因。目前正在大力开发胺基吸收剂,直接从空气中捕获二氧化碳(称为直接空气捕获(DAC)),以对抗气候变化的影响。然而,吸附剂的性能通常在环境温度(25°C)或更高的温度下进行评估,通常在干燥条件下进行评估。DAC工厂所在的自然环境的很大一部分温度低于25°C,环境空气中总是含有一些湿度。在本研究中,我们评估了在环境(25°C)和低温(−20°C)下,在干燥和潮湿条件下,浸渍到多孔氧化铝中的胺(聚乙烯亚胺(PEI)和四乙烯五胺(TEPA))对CO2的吸附行为。掺入40 wt%TEPA的γ-Al2O3样品(1.8 mmol CO2/g吸附剂)在25°C和400 ppm CO2下的CO2吸附能力最高,而掺入40 wt%PEI的γ-Al2O3样品表现出中等的吸收(0.9 mmol g–1)。掺入PEI和TEPA的γ-Al2O3样品的CO2容量随着胺含量和温度的降低而降低。40和20 wt%的TEPA吸附剂在−20°C的干燥条件下表现出最佳性能(分别为1.6和1.1 mmol g–1)。两种TEPA样品在10个吸附-解吸循环(−20°C下吸附和60°C下解吸)中也表现出稳定和高的工作容量(0.9和1.2 mmol g–1)。引入水分(−20和25°C时的相对湿度为70%)可提高胺浸渍吸收剂在两种温度下的CO2容量。40wt%PEI、40wt%TEPA和20wt%TEPA样品在两种温度下都显示出良好的CO2吸收。本文的结果表明,在环境和寒冷条件下,用PEI和TEPA浸渍的γ-Al2O3是DAC的潜在材料,为在不同环境条件下可扩展部署DAC工厂提供了进一步的机会。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

摘要图片

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Direct Air Capture of CO2 Using Amine/Alumina Sorbents at Cold Temperature

Rising CO2 emissions are responsible for increasing global temperatures causing climate change. Significant efforts are underway to develop amine-based sorbents to directly capture CO2 from air (called direct air capture (DAC)) to combat the effects of climate change. However, the sorbents’ performances have usually been evaluated at ambient temperatures (25 °C) or higher, most often under dry conditions. A significant portion of the natural environment where DAC plants can be deployed experiences temperatures below 25 °C, and ambient air always contains some humidity. In this study, we assess the CO2 adsorption behavior of amine (poly(ethyleneimine) (PEI) and tetraethylenepentamine (TEPA)) impregnated into porous alumina at ambient (25 °C) and cold temperatures (−20 °C) under dry and humid conditions. CO2 adsorption capacities at 25 °C and 400 ppm CO2 are highest for 40 wt% TEPA-incorporated γ-Al2O3 samples (1.8 mmol CO2/g sorbent), while 40 wt % PEI-impregnated γ-Al2O3 samples exhibit moderate uptakes (0.9 mmol g–1). CO2 capacities for both PEI- and TEPA-incorporated γ-Al2O3 samples decrease with decreasing amine content and temperatures. The 40 and 20 wt % TEPA sorbents show the best performance at −20 °C under dry conditions (1.6 and 1.1 mmol g–1, respectively). Both the TEPA samples also exhibit stable and high working capacities (0.9 and 1.2 mmol g–1) across 10 cycles of adsorption–desorption (adsorption at −20 °C and desorption conducted at 60 °C). Introducing moisture (70% RH at −20 and 25 °C) improves the CO2 capacity of the amine-impregnated sorbents at both temperatures. The 40 wt% PEI, 40 wt % TEPA, and 20 wt% TEPA samples show good CO2 uptakes at both temperatures. The results presented here indicate that γ-Al2O3 impregnated with PEI and TEPA are potential materials for DAC at ambient and cold conditions, with further opportunities to optimize these materials for the scalable deployment of DAC plants at different environmental conditions.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
ACS Environmental Au
ACS Environmental Au 环境科学-
CiteScore
7.10
自引率
0.00%
发文量
0
期刊介绍: ACS Environmental Au is an open access journal which publishes experimental research and theoretical results in all aspects of environmental science and technology both pure and applied. Short letters comprehensive articles reviews and perspectives are welcome in the following areas:Alternative EnergyAnthropogenic Impacts on Atmosphere Soil or WaterBiogeochemical CyclingBiomass or Wastes as ResourcesContaminants in Aquatic and Terrestrial EnvironmentsEnvironmental Data ScienceEcotoxicology and Public HealthEnergy and ClimateEnvironmental Modeling Processes and Measurement Methods and TechnologiesEnvironmental Nanotechnology and BiotechnologyGreen ChemistryGreen Manufacturing and EngineeringRisk assessment Regulatory Frameworks and Life-Cycle AssessmentsTreatment and Resource Recovery and Waste Management
期刊最新文献
Issue Publication Information Issue Editorial Masthead Biogeochemistry of Actinides: Recent Progress and Perspective Advancing Microbial Electrochemical H2O2 Synthesis by Tailoring the Surface Chemistry of Stereolithography-Derived 3D Pyrolytic Carbon Electrodes Evaluation of Natural Organic Additives as Eco-friendly Inhibitors for Calcium and Magnesium Scale Formation in Water Systems
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1