Hybrid magnetic core–shell TiO2@CoFe3O4 composite towards visible light-driven photodegradation of Methylene blue dye and the heavy metal adsorption: isotherm and kinetic study

Magnetic core–shell TiO₂@CoFe₃O₄ (TCM) composite photocatalytic particles with a core–shell structure were synthesized by the co-precipitation method as a novel catalyst for methylene blue (MB) dye degradation and adsorption efficiency of heavy-metal ion Pb(II) from aqueous solution. Various analytical techniques have verified the formation of the TCM core–shell through TEM, XRD, FT-IR, Raman, PL, and UV analysis. The presence of TiO₂ and cobalt magnetite in the TCM core shell is confirmed by XRD analysis. The formation of a homogenous CoFe₃O₄shell on TiO₂ spheres is confirmed by HR-TEM investigation. TiO₂ nanoparticle has a rutile structure with an average crystallite size of about 57.44 and a TCM core–shell of about 64.62 nm. From UV and PL studies, it was found that the core shell absorbs the visible range of the electromagnetic spectrum, which improves the effective separation between photo carriers. This study focused on several factors that influence metal ion adsorption, including initial concentrations, adsorbent dose, pH, and contact time. The TCM nanocomposite successfully separated the heavy metal ion Pb(II) from aqueous solutions, and the model predictions exactly matched the experimental results. For TCM material, the maximum adsorption efficiency for Pb(II) was 33.09 mg/g. The photocatalytic performance of TiO₂ and TCM is about 12% and 91% after 60 min for MB dye degradation. It was found that TiO₂@CoFe₃O₄ core–shell nanoparticles perform better as photo catalysts than pure TiO₂ and CoFe₃O₄due to their high efficiency and reusability. Furthermore, the analysis revealed that heavy metal adsorption from aqueous solutions could be reused over seven cycles with no adsorption capacity modification.