INVESTIGAÇÃO DA ATIVIDADE ELETROQUÍMICA DE LIGA Al-Cu-Li APÓS PROCESSO DE SOLDAGEM POR FRICÇÃO E MISTURA

INVESTIGATION OF THE ELECTROCHEMICAL ACTIVITY OF AN Al-Cu-Li ALLOY AFTER FRICTION STIR WELDING PROCESS. In this work, the local electrochemical activity of the zones coupled by Friction Stir Welding (FSW) of an Al-Cu-Li alloy was studied and the results were correlated to the microstructural characteristics of each zone. Electrochemical studies were carried out in the zones affected by welding using cyclic voltammetry (CV) and scanning electrochemical techniques (namely, SECM - Scanning Electrochemical Microscopy and LEIS – Local electrochemical impedance spectroscopy). The results showed that the welding joint (WJ) is predominantly cathodic relatively to the heat affected zones (HAZ). The HAZ was always anodic and showed the highest electrochemical activities among the tested ones. The high electrochemical activity of the HAZ was associated with the effect of galvanic coupling between the cathodic region (WJ) and the anodic region (HAZ). In addition, the advancing side (AS) presented increased electrochemical activity compared to the retreating one (RS).