F. Figueiredo, Pâmela Lopes Pedro da Silva, E. Botero, L. Maia
{"title":"用PET骨料部分替代天然骨料对混凝土抗压强度影响的探索性研究","authors":"F. Figueiredo, Pâmela Lopes Pedro da Silva, E. Botero, L. Maia","doi":"10.3934/matersci.2022011","DOIUrl":null,"url":null,"abstract":"The expansion of cities contributed to the problems related to the accumulation of waste and lack of control over its management, there are still around 2400 dumps or uncontrolled landfills in Brazil. There is a large volume of polyethylene terephthalate (PET) improperly discarded. In turn, the construction industry has been looking for sustainable ways to produce concrete. This work deals with the analysis of the replacement of PET as a fine aggregate in concrete in the proportions of 5% and 15%. PET particles pass more than 75% in the 2.36 mm opening sieve and have more than 99% of their particle size retained in the 0.15 mm opening sieve. Concrete properties, compressive strength, tensile strength, water absorption and void ratio were evaluated and compared with the reference mix. In total, 45 specimens cast in concrete were used to complete the experiment. The results obtained showed that mixture compositions that incorporate PET as fine aggregates decrease compressive and tensile strength, increase water absorption and void index. The results obtained showed that blending compositions that incorporate PET as fine aggregates decrease compressive strength in about 14%, decrease tensile strength in about 7–11%, increased the void ratio in almost 20% and increased the water absorption in about 30%.","PeriodicalId":7670,"journal":{"name":"AIMS Materials Science","volume":null,"pages":null},"PeriodicalIF":1.4000,"publicationDate":"2022-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Concrete with partial replacement of natural aggregate by PET aggregate—An exploratory study about the influence in the compressive strength\",\"authors\":\"F. Figueiredo, Pâmela Lopes Pedro da Silva, E. Botero, L. Maia\",\"doi\":\"10.3934/matersci.2022011\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The expansion of cities contributed to the problems related to the accumulation of waste and lack of control over its management, there are still around 2400 dumps or uncontrolled landfills in Brazil. There is a large volume of polyethylene terephthalate (PET) improperly discarded. In turn, the construction industry has been looking for sustainable ways to produce concrete. This work deals with the analysis of the replacement of PET as a fine aggregate in concrete in the proportions of 5% and 15%. PET particles pass more than 75% in the 2.36 mm opening sieve and have more than 99% of their particle size retained in the 0.15 mm opening sieve. Concrete properties, compressive strength, tensile strength, water absorption and void ratio were evaluated and compared with the reference mix. In total, 45 specimens cast in concrete were used to complete the experiment. The results obtained showed that mixture compositions that incorporate PET as fine aggregates decrease compressive and tensile strength, increase water absorption and void index. The results obtained showed that blending compositions that incorporate PET as fine aggregates decrease compressive strength in about 14%, decrease tensile strength in about 7–11%, increased the void ratio in almost 20% and increased the water absorption in about 30%.\",\"PeriodicalId\":7670,\"journal\":{\"name\":\"AIMS Materials Science\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.4000,\"publicationDate\":\"2022-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"AIMS Materials Science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3934/matersci.2022011\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"AIMS Materials Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3934/matersci.2022011","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Concrete with partial replacement of natural aggregate by PET aggregate—An exploratory study about the influence in the compressive strength
The expansion of cities contributed to the problems related to the accumulation of waste and lack of control over its management, there are still around 2400 dumps or uncontrolled landfills in Brazil. There is a large volume of polyethylene terephthalate (PET) improperly discarded. In turn, the construction industry has been looking for sustainable ways to produce concrete. This work deals with the analysis of the replacement of PET as a fine aggregate in concrete in the proportions of 5% and 15%. PET particles pass more than 75% in the 2.36 mm opening sieve and have more than 99% of their particle size retained in the 0.15 mm opening sieve. Concrete properties, compressive strength, tensile strength, water absorption and void ratio were evaluated and compared with the reference mix. In total, 45 specimens cast in concrete were used to complete the experiment. The results obtained showed that mixture compositions that incorporate PET as fine aggregates decrease compressive and tensile strength, increase water absorption and void index. The results obtained showed that blending compositions that incorporate PET as fine aggregates decrease compressive strength in about 14%, decrease tensile strength in about 7–11%, increased the void ratio in almost 20% and increased the water absorption in about 30%.
期刊介绍:
AIMS Materials Science welcomes, but not limited to, the papers from the following topics: · Biological materials · Ceramics · Composite materials · Magnetic materials · Medical implant materials · New properties of materials · Nanoscience and nanotechnology · Polymers · Thin films.