{"title":"添加和不添加表面活性剂MWCNT/水纳米流体稳定性分析","authors":"M. Muruganandam","doi":"10.5185/amp.2019.0016","DOIUrl":null,"url":null,"abstract":"Much research works are being carried out in applications of nanofluids at different engineering fields as they have improved thermal conductivity. However, the effective applications of nanofluids have limitations such as poor stability, sedimentation, erosive wear and potential health risk. In heat transfer application point of view, stability of nanoparticles plays a major function in enhancing heat transfer. In this experimental investigation, the stability of Multi-walled Carbon Nano Tube (MWCNT)/water nanofluids with surfactant and without surfactant has been carried out by keeping the nanofluids at static condition and at constant temperature at different time interval. The nanofluids were prepared by means of the use of Multi-walled Carbon Nano Tube (MWCNT) as base materials and distilled water as base fluids at 0.1%, 0.3%, 0.5% and 0.7% volume concentration with 0.02% and 0.05% sodium dodecyl butane sulfonate (SDBS) as surfactant and without the surfactant two-step method is used to put together the nanofluids underneath attention. The stability analysis of prepared nanofluids are studied with the UV-Vis. spectrophotometer, measure of zeta potential value , and photograph capturing techniques by keeping the nanofluids under static condition for The MWCNT nanofluids have been characterized with the sample of just after preparation after 30 days of preparation and after 60 days. It is studied that the nanofluids with surfactant showed better stability than the nanofluids without surfactant. Found that the nanofluids at 0.7% volume concentration with surfactant showed good stability with negligible visual sedimentation even after 60 days than the nanofluids without surfactant. Therefore the MWCNT/water nanofluids are the potential heat transfer fluids to apply in heat transfer field. Copyright © VBRI Press.","PeriodicalId":7297,"journal":{"name":"Advanced Materials Proceedings","volume":"31 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-09-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Stability Analysis on MWCNT/Water Nanofluids with and without Surfactant\",\"authors\":\"M. Muruganandam\",\"doi\":\"10.5185/amp.2019.0016\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Much research works are being carried out in applications of nanofluids at different engineering fields as they have improved thermal conductivity. However, the effective applications of nanofluids have limitations such as poor stability, sedimentation, erosive wear and potential health risk. In heat transfer application point of view, stability of nanoparticles plays a major function in enhancing heat transfer. In this experimental investigation, the stability of Multi-walled Carbon Nano Tube (MWCNT)/water nanofluids with surfactant and without surfactant has been carried out by keeping the nanofluids at static condition and at constant temperature at different time interval. The nanofluids were prepared by means of the use of Multi-walled Carbon Nano Tube (MWCNT) as base materials and distilled water as base fluids at 0.1%, 0.3%, 0.5% and 0.7% volume concentration with 0.02% and 0.05% sodium dodecyl butane sulfonate (SDBS) as surfactant and without the surfactant two-step method is used to put together the nanofluids underneath attention. The stability analysis of prepared nanofluids are studied with the UV-Vis. spectrophotometer, measure of zeta potential value , and photograph capturing techniques by keeping the nanofluids under static condition for The MWCNT nanofluids have been characterized with the sample of just after preparation after 30 days of preparation and after 60 days. It is studied that the nanofluids with surfactant showed better stability than the nanofluids without surfactant. Found that the nanofluids at 0.7% volume concentration with surfactant showed good stability with negligible visual sedimentation even after 60 days than the nanofluids without surfactant. Therefore the MWCNT/water nanofluids are the potential heat transfer fluids to apply in heat transfer field. Copyright © VBRI Press.\",\"PeriodicalId\":7297,\"journal\":{\"name\":\"Advanced Materials Proceedings\",\"volume\":\"31 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-09-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Advanced Materials Proceedings\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.5185/amp.2019.0016\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advanced Materials Proceedings","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5185/amp.2019.0016","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Stability Analysis on MWCNT/Water Nanofluids with and without Surfactant
Much research works are being carried out in applications of nanofluids at different engineering fields as they have improved thermal conductivity. However, the effective applications of nanofluids have limitations such as poor stability, sedimentation, erosive wear and potential health risk. In heat transfer application point of view, stability of nanoparticles plays a major function in enhancing heat transfer. In this experimental investigation, the stability of Multi-walled Carbon Nano Tube (MWCNT)/water nanofluids with surfactant and without surfactant has been carried out by keeping the nanofluids at static condition and at constant temperature at different time interval. The nanofluids were prepared by means of the use of Multi-walled Carbon Nano Tube (MWCNT) as base materials and distilled water as base fluids at 0.1%, 0.3%, 0.5% and 0.7% volume concentration with 0.02% and 0.05% sodium dodecyl butane sulfonate (SDBS) as surfactant and without the surfactant two-step method is used to put together the nanofluids underneath attention. The stability analysis of prepared nanofluids are studied with the UV-Vis. spectrophotometer, measure of zeta potential value , and photograph capturing techniques by keeping the nanofluids under static condition for The MWCNT nanofluids have been characterized with the sample of just after preparation after 30 days of preparation and after 60 days. It is studied that the nanofluids with surfactant showed better stability than the nanofluids without surfactant. Found that the nanofluids at 0.7% volume concentration with surfactant showed good stability with negligible visual sedimentation even after 60 days than the nanofluids without surfactant. Therefore the MWCNT/water nanofluids are the potential heat transfer fluids to apply in heat transfer field. Copyright © VBRI Press.