溶胶-凝胶浸涂法制备(Mn, Al)共掺杂ZnO薄膜的结构、形态和光学性能

Hadia Aounallah, M. Zaabat, Abdelouahab Noua, Tarek Diab Ounis
{"title":"溶胶-凝胶浸涂法制备(Mn, Al)共掺杂ZnO薄膜的结构、形态和光学性能","authors":"Hadia Aounallah, M. Zaabat, Abdelouahab Noua, Tarek Diab Ounis","doi":"10.4028/www.scientific.net/AEF.44.17","DOIUrl":null,"url":null,"abstract":"In this study, Aluminum (Al) and Manganese (Mn) co-doped ZnO thin films were successfully synthesized into glass substrates by the sol-gel dip-coating method with different Al concentrations (1%, 3%, and 5%). The structural, morphological, and optical properties of the obtained thin films were characterized by X-ray diffraction (XRD), Atomic force microscopy (AFM), and UV–VIS spectroscopy. XRD pattern revealed that the films have a polycrystalline hexagonal structure with a preferred orientation along (101) for undoped ZnO thin films, further the co-doped ZnO thin films show a shift in the preferred orientation to (002) direction without any Mn or Al related phases. The morphological analysis showed that the films have a uniform and dense ZnO grains, without any voids and cracks, and it was found that the surface roughness (RMS) increases from 8,27 to 14,43 nm when the Al doping concentration increased from 1% to 3%; however, when Al doping concentration is 5%, the RMS value decreased to 2,80 nm. From the optical analysis, the higher average transmittance was found to be corresponding to 5% Al doping concentration.","PeriodicalId":7184,"journal":{"name":"Advanced Engineering Forum","volume":"36 1","pages":"17 - 28"},"PeriodicalIF":0.0000,"publicationDate":"2022-01-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Structural, Morphological and Optical Properties of (Mn, Al) Co-Doped ZnO Thin Films Prepared by Sol-Gel Dip Coating Method\",\"authors\":\"Hadia Aounallah, M. Zaabat, Abdelouahab Noua, Tarek Diab Ounis\",\"doi\":\"10.4028/www.scientific.net/AEF.44.17\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this study, Aluminum (Al) and Manganese (Mn) co-doped ZnO thin films were successfully synthesized into glass substrates by the sol-gel dip-coating method with different Al concentrations (1%, 3%, and 5%). The structural, morphological, and optical properties of the obtained thin films were characterized by X-ray diffraction (XRD), Atomic force microscopy (AFM), and UV–VIS spectroscopy. XRD pattern revealed that the films have a polycrystalline hexagonal structure with a preferred orientation along (101) for undoped ZnO thin films, further the co-doped ZnO thin films show a shift in the preferred orientation to (002) direction without any Mn or Al related phases. The morphological analysis showed that the films have a uniform and dense ZnO grains, without any voids and cracks, and it was found that the surface roughness (RMS) increases from 8,27 to 14,43 nm when the Al doping concentration increased from 1% to 3%; however, when Al doping concentration is 5%, the RMS value decreased to 2,80 nm. From the optical analysis, the higher average transmittance was found to be corresponding to 5% Al doping concentration.\",\"PeriodicalId\":7184,\"journal\":{\"name\":\"Advanced Engineering Forum\",\"volume\":\"36 1\",\"pages\":\"17 - 28\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-01-17\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Advanced Engineering Forum\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.4028/www.scientific.net/AEF.44.17\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advanced Engineering Forum","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.4028/www.scientific.net/AEF.44.17","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

在本研究中,采用溶胶-凝胶浸包法制备了不同Al浓度(1%、3%、5%)的铝(Al)和锰(Mn)共掺杂ZnO薄膜。利用x射线衍射仪(XRD)、原子力显微镜(AFM)和紫外可见光谱(UV-VIS)对薄膜的结构、形态和光学性质进行了表征。XRD分析结果表明,共掺杂ZnO薄膜具有沿(101)方向优先取向的多晶六方结构,且共掺杂ZnO薄膜的优先取向向(002)方向偏移,不存在Mn或Al相关相。形貌分析表明,薄膜具有均匀致密的ZnO晶粒,没有空洞和裂纹,当Al掺杂浓度从1%增加到3%时,表面粗糙度(RMS)从8.27 nm增加到14.43 nm;而当Al掺杂浓度为5%时,RMS值降至2,80 nm。光学分析表明,当Al掺杂浓度为5%时,平均透过率较高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Structural, Morphological and Optical Properties of (Mn, Al) Co-Doped ZnO Thin Films Prepared by Sol-Gel Dip Coating Method
In this study, Aluminum (Al) and Manganese (Mn) co-doped ZnO thin films were successfully synthesized into glass substrates by the sol-gel dip-coating method with different Al concentrations (1%, 3%, and 5%). The structural, morphological, and optical properties of the obtained thin films were characterized by X-ray diffraction (XRD), Atomic force microscopy (AFM), and UV–VIS spectroscopy. XRD pattern revealed that the films have a polycrystalline hexagonal structure with a preferred orientation along (101) for undoped ZnO thin films, further the co-doped ZnO thin films show a shift in the preferred orientation to (002) direction without any Mn or Al related phases. The morphological analysis showed that the films have a uniform and dense ZnO grains, without any voids and cracks, and it was found that the surface roughness (RMS) increases from 8,27 to 14,43 nm when the Al doping concentration increased from 1% to 3%; however, when Al doping concentration is 5%, the RMS value decreased to 2,80 nm. From the optical analysis, the higher average transmittance was found to be corresponding to 5% Al doping concentration.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Implications of the Global Race to Net-Zero by 2050 for the Strategic Fleet of Coal-Fired Power Plants in SADC Optimum Design of Mix Ratio of Premixed Iron Tailings Mortar Based on Response Surface Method Evaluation and Comparison of Breach Parametric Model for Embankment Dams Numerical Modeling of Cantilever Retaining Wall Using EPS Geofoam An Investigation of the Mechanical and Durability Properties of Hollow Concrete Blocks Made with Copper Mine Tailings as a Partial Cement Replacement
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1