Surfactant Assisted Synthesis of Homogeneous Calcium Based CO2 Sorbent at Room Temperature

Calcium oxide (CaO) sorbents have been recently used for removal of CO 2 gases in fossil fuel-fired power plant. However, there are some limitations of CaO in CO 2 capturing such as rapid loss of activity during the capture cycles, which is a result of sintering, attrition, and consequent elutriation. Therefore, this paper has demonstrated a novel synthesis method to produce CaO at room temperature to avoid abovementioned drawbacks. In addition, introduction of ionic surfactant of sodium dodecyl sulfate to the CaO formation solution has shown a positive result of formation of homogeneous spherical particle with a mean Z-average diameter of 345.2 nm and polydispersion index (PDI) of 0.335 by dynamical light scattering measurement. Subjected to a high calcination temperature of 1200 o C, developed CaO is able to maintain a CO 2 uptake capacity of 0.1025 g CO2 /g sorbent under 30 minutes of carbonation time. Despite its lower CO 2 uptake capacity compared to maximum theoretical limit of 0.78 g CO2/gsorbent , CaO particles is able to withstand a high calcination temperature of 1200 o C and reported a particle size distribution ranged from 0.4 - 1.2µm after calcination which is just slightly larger than fresh developed CaO. Given that such small narrow distributed size of CaO, developed CaO at room temperature is good for packed-bed reactor in calcium looping processes and more studies are required to find a suitable support for fluidized bed reactor type. This successful synthesis story of CaO particle at room temperature has unraveled the possibility to develop nanosized CaO at room temperature in order to achieve high CO 2 uptake capacity while enjoying its superior thermal stability over multiple carbonation/calcination cycles.