Experimental Methods for the Evaluation of the Efficiency of an Innovative Sulfur-Dissolving Product in HP-HT Conditions

During production from sour gas reservoirs, precipitation of elemental sulfur can take place in production tubing, resulting in plugging of the well and stop of production. Injection in tubing of products devoted to dissolving sulfur can be an efficient solution for plug removal and production restoring. Traditionally, organic solvents (like toluene) are employed for solid sulfur dissolution. In the present work, experimental investigations have been performed on a particular innovative liquid product designed as active phase for wellbore injection or near wellbore applications. The analyses about the behavior of the considered product were conducted at HP-HT conditions. For this purpose, PVT laboratory equipment was employed, being able to reproduce the conditions of interest for the formation of elemental sulfur plug in well. An important preliminary optimization phase on the experimental setup was necessary to assure the correct management of studied liquid substance and solid sulfur. Integration of main outcomes with other kind of analyses allowed to depict a complete representation of the behavior: microscopy analysis of the liquid phase and high-resolution tomography of solid sulfur before and after the interaction were employed. A key point of the experimental characterization is the reproduction of significant involved phenomena. A preliminary effort was necessary for reproducing the realistic crystal form expected during the precipitation of solid sulfur in well. The dissolution efficiency of the liquid product is evaluated by observing its physical interaction with sulfur in a HP-HT cell. Particular attention was paid to correctly handling employed substances at the considered pressure and temperature conditions. A detailed description of the optimized equipment used in laboratory is provided. Several dissolution tests have been conducted at different temperature and pressure conditions, aiming to observe the dependence of the dissolution efficiency on the thermodynamic parameters. A visual qualitative analysis was performed on both the liquid product and the solid plug, before and after the interaction in cell. This allowed to deepen the comprehension of the dynamics of sulfur dissolution, which takes place not only from the top face of the plug, but also from preferential paths (fractures) present inside the plug itself. The presence of sulfur crystals dispersed in the liquid product after sampling from the cell is also evident at the end of the tests. The studied novel sulfur-dissolving liquid active phase is a candidate for remedial job injection at well in case of plugging due to solid elemental sulfur precipitation. The analyses here presented allowed to characterize the dissolution potential of this product. An optimized workflow was designed, including different kind of experimental disciplines.