{"title":"玻璃云母-环氧树脂绝缘体结构性能随加速热氧化老化的演变","authors":"V. Boucher, P. Rain, G. Teissèdre, P. Schlupp","doi":"10.1109/CEIDP.2008.4772842","DOIUrl":null,"url":null,"abstract":"The stator windings of large air-cooled rotating machines are insulated with mica-glass fabric impregnated with epoxy. These composites are submitted to thermal, mechanical and electrical stresses. A specific aging arrangement has been setup allowing artificial thermo-oxidative aging of dielectric samples thanks to the application of a dry O2 pressure at a controlled temperature. Two different materials are considered: a class H material, designed to sustain temperatures up to 180degC, and a high conductivity (HC) tape material, which is a class F insulation. The samples were followed in mass and DMA (dynamic mechanical analysis). Similar profiles of mass evolution with various temperature and oxygen pressure contribute to validate the artificial aging procedure. DMA allowed determining the glass transition temperature (Tg) of the epoxy resin and observing the evolution of the network density of the polymeric matrix along aging. Delaminations of a few tens mum thick were observed within the samples after aging. These characterizations allowed the comparison between both materials.","PeriodicalId":6381,"journal":{"name":"2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena","volume":"9 1","pages":"83-86"},"PeriodicalIF":0.0000,"publicationDate":"2008-10-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Evolution of structural properties of glass-mica-epoxy insulations along accelerated thermo-oxidative aging\",\"authors\":\"V. Boucher, P. Rain, G. Teissèdre, P. Schlupp\",\"doi\":\"10.1109/CEIDP.2008.4772842\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The stator windings of large air-cooled rotating machines are insulated with mica-glass fabric impregnated with epoxy. These composites are submitted to thermal, mechanical and electrical stresses. A specific aging arrangement has been setup allowing artificial thermo-oxidative aging of dielectric samples thanks to the application of a dry O2 pressure at a controlled temperature. Two different materials are considered: a class H material, designed to sustain temperatures up to 180degC, and a high conductivity (HC) tape material, which is a class F insulation. The samples were followed in mass and DMA (dynamic mechanical analysis). Similar profiles of mass evolution with various temperature and oxygen pressure contribute to validate the artificial aging procedure. DMA allowed determining the glass transition temperature (Tg) of the epoxy resin and observing the evolution of the network density of the polymeric matrix along aging. Delaminations of a few tens mum thick were observed within the samples after aging. These characterizations allowed the comparison between both materials.\",\"PeriodicalId\":6381,\"journal\":{\"name\":\"2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena\",\"volume\":\"9 1\",\"pages\":\"83-86\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2008-10-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/CEIDP.2008.4772842\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 Annual Report Conference on Electrical Insulation and Dielectric Phenomena","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/CEIDP.2008.4772842","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Evolution of structural properties of glass-mica-epoxy insulations along accelerated thermo-oxidative aging
The stator windings of large air-cooled rotating machines are insulated with mica-glass fabric impregnated with epoxy. These composites are submitted to thermal, mechanical and electrical stresses. A specific aging arrangement has been setup allowing artificial thermo-oxidative aging of dielectric samples thanks to the application of a dry O2 pressure at a controlled temperature. Two different materials are considered: a class H material, designed to sustain temperatures up to 180degC, and a high conductivity (HC) tape material, which is a class F insulation. The samples were followed in mass and DMA (dynamic mechanical analysis). Similar profiles of mass evolution with various temperature and oxygen pressure contribute to validate the artificial aging procedure. DMA allowed determining the glass transition temperature (Tg) of the epoxy resin and observing the evolution of the network density of the polymeric matrix along aging. Delaminations of a few tens mum thick were observed within the samples after aging. These characterizations allowed the comparison between both materials.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
