INFLUENCE OF THE PROJECTILE SHAPE ON THE DYNAMIC TENSILE CHARACTERIZATION OF CONCRETE USING A SPLIT HOPKINSON BAR

Because of its relevance in civil infrastructures, the analysis of the dynamic behaviour of concrete has increased exponentially in recent years. This is motivated by the new type of threats that have to be taken into consideration nowadays when designing these types of structures. The growing interest in the dynamic response of concrete arises from the enhancement of its mechanical properties when the material is subjected to high strain rates. In this research, the traditional Split Hopkinson Pressure Bar developed by Kolsky, with a standard compression configuration (including incident and transmitted bars) was modified into a version in which the transmission bar was removed, so that the specimen’s response is dominated by tensile stresses inside it. Spalling tests on cylindrical samples were carried out to measure the tensile strength and the fracture energy of conventional concrete. Results for strain rates ranging from 60 to 130 s –1 are presented and compared to the respective quasi-static values. As the key point of the research, two different projectile shapes (cylindrical and conical) have also been evaluated, presenting a qualitative and quantitative analysis regarding the variations in tensile stress evolution of the pulses. a deeper analysis should be done to clarify this point. From the tests, a mean value of 1.264 N/mm was obtained. Similar values of G (cid:3007) were obtained between cylindrical and conical projectiles, just a small difference in the higher strain rate produced by the cylindrical projectile. DIF parameter for the fracture energy show that even when the strain rate is kept within a narrow range, a common increasing trend can be seen.