{"title":"减小SiC功率器件应力的准z源电流型H7逆变器","authors":"Przemysław Trochimiuk, M. Zdanowski, J. Rąbkowski","doi":"10.24425/BPASTS.2019.131568","DOIUrl":null,"url":null,"abstract":". This paper discusses selected problems regarding a high-frequency improved current-fed quasi-Z-source inverter (iCFqZSI) designed and built with SiC power devices. At first, new, modified topology of the impedance network is presented. As the structure is derived from the series connection of two networks, the voltage stress across the SiC diodes and the inductors is reduced by a factor of two. Therefore, the SiC MOSFETs may be switched with frequencies above 100 kHz and volume and weight of the passive components is decreased. Furthermore, additional leg with two SiC MOSFETs working as a bidirectional switch is added to limit the current stress during the short-through states. In order to verify the performance of the proposed solution a 6 kVA laboratory model was designed to connect a 400 V DC source (battery) and a 3 £ 400 V grid. According to presented simulations and experimental results high-frequency iCFqZSI is bidirectional – it may act as an inverter, but also as a rectifier. Performed measurements show correct operation at switching frequency of 100 kHz, high quality of the input and output waveforms is observed. The additional leg increases efficiency by up to 0.6% – peak value is 97.8%.","PeriodicalId":55299,"journal":{"name":"Bulletin of the Polish Academy of Sciences-Technical Sciences","volume":"35 1","pages":""},"PeriodicalIF":1.2000,"publicationDate":"2023-11-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Current-fed quasi-Z-source H7 inverter with reduced stress on SiC power devices\",\"authors\":\"Przemysław Trochimiuk, M. Zdanowski, J. Rąbkowski\",\"doi\":\"10.24425/BPASTS.2019.131568\",\"DOIUrl\":null,\"url\":null,\"abstract\":\". This paper discusses selected problems regarding a high-frequency improved current-fed quasi-Z-source inverter (iCFqZSI) designed and built with SiC power devices. At first, new, modified topology of the impedance network is presented. As the structure is derived from the series connection of two networks, the voltage stress across the SiC diodes and the inductors is reduced by a factor of two. Therefore, the SiC MOSFETs may be switched with frequencies above 100 kHz and volume and weight of the passive components is decreased. Furthermore, additional leg with two SiC MOSFETs working as a bidirectional switch is added to limit the current stress during the short-through states. In order to verify the performance of the proposed solution a 6 kVA laboratory model was designed to connect a 400 V DC source (battery) and a 3 £ 400 V grid. According to presented simulations and experimental results high-frequency iCFqZSI is bidirectional – it may act as an inverter, but also as a rectifier. Performed measurements show correct operation at switching frequency of 100 kHz, high quality of the input and output waveforms is observed. The additional leg increases efficiency by up to 0.6% – peak value is 97.8%.\",\"PeriodicalId\":55299,\"journal\":{\"name\":\"Bulletin of the Polish Academy of Sciences-Technical Sciences\",\"volume\":\"35 1\",\"pages\":\"\"},\"PeriodicalIF\":1.2000,\"publicationDate\":\"2023-11-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Bulletin of the Polish Academy of Sciences-Technical Sciences\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.24425/BPASTS.2019.131568\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bulletin of the Polish Academy of Sciences-Technical Sciences","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.24425/BPASTS.2019.131568","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MULTIDISCIPLINARY","Score":null,"Total":0}
Current-fed quasi-Z-source H7 inverter with reduced stress on SiC power devices
. This paper discusses selected problems regarding a high-frequency improved current-fed quasi-Z-source inverter (iCFqZSI) designed and built with SiC power devices. At first, new, modified topology of the impedance network is presented. As the structure is derived from the series connection of two networks, the voltage stress across the SiC diodes and the inductors is reduced by a factor of two. Therefore, the SiC MOSFETs may be switched with frequencies above 100 kHz and volume and weight of the passive components is decreased. Furthermore, additional leg with two SiC MOSFETs working as a bidirectional switch is added to limit the current stress during the short-through states. In order to verify the performance of the proposed solution a 6 kVA laboratory model was designed to connect a 400 V DC source (battery) and a 3 £ 400 V grid. According to presented simulations and experimental results high-frequency iCFqZSI is bidirectional – it may act as an inverter, but also as a rectifier. Performed measurements show correct operation at switching frequency of 100 kHz, high quality of the input and output waveforms is observed. The additional leg increases efficiency by up to 0.6% – peak value is 97.8%.
期刊介绍:
The Bulletin of the Polish Academy of Sciences: Technical Sciences is published bimonthly by the Division IV Engineering Sciences of the Polish Academy of Sciences, since the beginning of the existence of the PAS in 1952. The journal is peer‐reviewed and is published both in printed and electronic form. It is established for the publication of original high quality papers from multidisciplinary Engineering sciences with the following topics preferred:
Artificial and Computational Intelligence,
Biomedical Engineering and Biotechnology,
Civil Engineering,
Control, Informatics and Robotics,
Electronics, Telecommunication and Optoelectronics,
Mechanical and Aeronautical Engineering, Thermodynamics,
Material Science and Nanotechnology,
Power Systems and Power Electronics.