碳钢氢致开裂失效机理研究——以石油天然气工业为例

M. Asadipoor, A. P. Anaraki, J. Kadkhodapour, Seyed Mohammad Hesein Sharifi, A. Barnoush
{"title":"碳钢氢致开裂失效机理研究——以石油天然气工业为例","authors":"M. Asadipoor, A. P. Anaraki, J. Kadkhodapour, Seyed Mohammad Hesein Sharifi, A. Barnoush","doi":"10.22050/IJOGST.2020.210113.1529","DOIUrl":null,"url":null,"abstract":"Abstract Although the hydrogen induced cracking (HIC) is recognized as one of the destructive modes for pipeline and component steels serving in sour environments, the behavior of the HIC is still not fully understood. On the other hand, although many efforts have been made to identify the effects of hydrogen on laboratory steel specimens, the study of actual industrial samples has received less attention. In this paper, we have studied the mechanism of the HIC in a damaged pipe of a real case study of the oil and gas industry (finger type slug catcher) using detection, characterization, and microstructural investigation methods. The detection of the HIC in the specimens by advanced ultrasonic techniques, failure analysis using tensile tests, chemical composition analysis, optical microscopy (OM), field emission scanning electron microscopy (FE-SEM), and energy-dispersive spectroscopy (EDS) techniques and their correlation with the microstructure, type, and morphology of the inclusions were conducted. The results indicated that the value of elements, especially carbon (0.13 wt %) and manganese (1.44 wt %), satisfies the requirement of API 5L specification. Furthermore, the inclusions, such as elongated manganese sulfide and spherical aluminum oxide, and the pearlite grains or the interfaces of the ferrite–pearlite phases played an essential role in the HIC phenomenon as nucleation and propagation places of cracks. It was also observed that HIC cracks were mostly initiated and propagated through the center or near the center of a cross-section of specimens. This region was a segregated zone where the center segregation of elements has occurred. Finally, we recognized a linear correlation between the HIC susceptibility and hardness value in steel, where by moving away from the cracks (1800 µm) to the crack edges, the hardness value increased significantly (179–203 HV), confirming the diffusion of hydrogen into hydrogen traps.","PeriodicalId":14575,"journal":{"name":"Iranian Journal of Oil and Gas Science and Technology","volume":"40 1","pages":"44-60"},"PeriodicalIF":0.0000,"publicationDate":"2020-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation into Mechanism of Hydrogen Induced Cracking Failure in Carbon Steel: A Case Study of Oil and Gas Industry\",\"authors\":\"M. Asadipoor, A. P. Anaraki, J. Kadkhodapour, Seyed Mohammad Hesein Sharifi, A. Barnoush\",\"doi\":\"10.22050/IJOGST.2020.210113.1529\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Although the hydrogen induced cracking (HIC) is recognized as one of the destructive modes for pipeline and component steels serving in sour environments, the behavior of the HIC is still not fully understood. On the other hand, although many efforts have been made to identify the effects of hydrogen on laboratory steel specimens, the study of actual industrial samples has received less attention. In this paper, we have studied the mechanism of the HIC in a damaged pipe of a real case study of the oil and gas industry (finger type slug catcher) using detection, characterization, and microstructural investigation methods. The detection of the HIC in the specimens by advanced ultrasonic techniques, failure analysis using tensile tests, chemical composition analysis, optical microscopy (OM), field emission scanning electron microscopy (FE-SEM), and energy-dispersive spectroscopy (EDS) techniques and their correlation with the microstructure, type, and morphology of the inclusions were conducted. The results indicated that the value of elements, especially carbon (0.13 wt %) and manganese (1.44 wt %), satisfies the requirement of API 5L specification. Furthermore, the inclusions, such as elongated manganese sulfide and spherical aluminum oxide, and the pearlite grains or the interfaces of the ferrite–pearlite phases played an essential role in the HIC phenomenon as nucleation and propagation places of cracks. It was also observed that HIC cracks were mostly initiated and propagated through the center or near the center of a cross-section of specimens. This region was a segregated zone where the center segregation of elements has occurred. Finally, we recognized a linear correlation between the HIC susceptibility and hardness value in steel, where by moving away from the cracks (1800 µm) to the crack edges, the hardness value increased significantly (179–203 HV), confirming the diffusion of hydrogen into hydrogen traps.\",\"PeriodicalId\":14575,\"journal\":{\"name\":\"Iranian Journal of Oil and Gas Science and Technology\",\"volume\":\"40 1\",\"pages\":\"44-60\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Iranian Journal of Oil and Gas Science and Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.22050/IJOGST.2020.210113.1529\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Iranian Journal of Oil and Gas Science and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.22050/IJOGST.2020.210113.1529","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

摘要氢致开裂(HIC)已被公认为是管道钢和构件钢在酸性环境下的破坏模式之一,但氢致开裂的机理尚不完全清楚。另一方面,尽管已经做出了许多努力来确定氢对实验室钢样品的影响,但对实际工业样品的研究却受到较少的关注。在本文中,我们通过检测、表征和微观结构研究方法,研究了油气行业中一个实际案例(指状段塞流捕集器)损坏管道中HIC的机理。采用先进的超声技术、拉伸试验失效分析、化学成分分析、光学显微镜(OM)、场发射扫描电镜(FE-SEM)和能量色散光谱(EDS)技术对试样中的HIC进行了检测,并分析了HIC与夹杂物的微观结构、类型和形貌的关系。结果表明,样品中碳(0.13 wt %)和锰(1.44 wt %)的含量均满足API 5L的要求。此外,细长的硫化锰和球形氧化铝等夹杂物以及珠光体晶粒或铁素体-珠光体相界面作为裂纹的形核和扩展场所,在HIC现象中发挥了重要作用。HIC裂纹的萌生和扩展主要是通过试样的中心或靠近截面的中心。这个地区是一个隔离区,在那里发生了元素的中心隔离。最后,我们认识到钢中的HIC敏感性与硬度值之间存在线性关系,当从裂纹(1800µm)移动到裂纹边缘时,硬度值显着增加(179-203 HV),证实了氢向氢阱的扩散。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Investigation into Mechanism of Hydrogen Induced Cracking Failure in Carbon Steel: A Case Study of Oil and Gas Industry
Abstract Although the hydrogen induced cracking (HIC) is recognized as one of the destructive modes for pipeline and component steels serving in sour environments, the behavior of the HIC is still not fully understood. On the other hand, although many efforts have been made to identify the effects of hydrogen on laboratory steel specimens, the study of actual industrial samples has received less attention. In this paper, we have studied the mechanism of the HIC in a damaged pipe of a real case study of the oil and gas industry (finger type slug catcher) using detection, characterization, and microstructural investigation methods. The detection of the HIC in the specimens by advanced ultrasonic techniques, failure analysis using tensile tests, chemical composition analysis, optical microscopy (OM), field emission scanning electron microscopy (FE-SEM), and energy-dispersive spectroscopy (EDS) techniques and their correlation with the microstructure, type, and morphology of the inclusions were conducted. The results indicated that the value of elements, especially carbon (0.13 wt %) and manganese (1.44 wt %), satisfies the requirement of API 5L specification. Furthermore, the inclusions, such as elongated manganese sulfide and spherical aluminum oxide, and the pearlite grains or the interfaces of the ferrite–pearlite phases played an essential role in the HIC phenomenon as nucleation and propagation places of cracks. It was also observed that HIC cracks were mostly initiated and propagated through the center or near the center of a cross-section of specimens. This region was a segregated zone where the center segregation of elements has occurred. Finally, we recognized a linear correlation between the HIC susceptibility and hardness value in steel, where by moving away from the cracks (1800 µm) to the crack edges, the hardness value increased significantly (179–203 HV), confirming the diffusion of hydrogen into hydrogen traps.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
期刊最新文献
Relation between asphaltene adsorption on the nanoparticles surface and asphaltene precipitation inhibition during real crude oil natural depletion tests Evaluation of a novel mechanistic approach to predict transport of water and ions through shale Investigation of origin, sedimentary environment and preservation of organic matter: A case study in Garau Formation Detection of heavy bitumen contaminations with using corrected Rock-Eval pyrolysis data Geochemical Investigation of Trace Metals in Crude Oils from Some Producing Oil Fields in Niger Delta, Nigeria
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1