The Precipitation of Aluminium Hydroxocarbonates Powders from Aqueous Solution: Precipitate Compositions and Precipitation Mechanisms

A series of aluminium hydroxocarbonate hydrates were prepared by precipitation from aluminium nitrate solution, with five sodium hydrogen carbonate-sodium carbonate solutions of different pH, at ambient temperature. The course of precipitation was monitored by pH measurement and the final precipitate compositions were determined by chemical analysis, infra-red spectrophotometry, X-ray diffraction and thermal analysis. Precipitation generally occurred through three stages, primary precipitation of materials with low carbonate content at low pH with evolution of carbon dioxide, their dissolution to form hydroxcarbonato anions and then secondary reprecipitation of the final products at higher pH. These materials were mixtures of polyhydroxoaluminium carbonate hydrates of general composition Aln(OH)3n-2CO3 · hH2O (where n = 2, 4, 6 and h = 6–8); their CO3 content increased with increasing pH and carbonate anion content of the precipitant solution.