A Slotted Lotus Shaped Microstrip Antenna based an EBG Structure

The objective of this paper is to study intensively the design of a printed slotted patch based lotus shape structure mounted on a dielectric substrate backed with an electromagnetic band Gap (EBG) layer for wideband applications. The dielectric substrate is made of a Roger RT/duroid®5880 layer. An EBG layer is introduced on the back profile of the substrate to provide a high gain bandwidth product over wide frequency bands. The antenna is fed with a novel coplanar waveguide (CPW) structure of a flared geometry; therefore, the ground plane is mounted on the same substrate surface with the patch structure. A conductive trace is introduced at the substrate back from the bottom connected to the CPW through two shoring plates to remove the effects of the EBG layer on the feed structure. The EBG performance and the antenna design methodology are discussed using analytical analyses and numerical parametric studies, respectively. The numerical simulation is conducted using CST MWS Finally; the optimal antenna design is fabricated and measured for validation to be compared to the simulated results.