Research on fault detection and identification methods of nonlinear dynamic process based on ICA

Abstract In the present study, nonlinear dynamic process data are mapped into the kernel state space by kernel gauge variable analysis method to obtain decorrelated state data. The time-lapse covariance matrix of the state data is weighted and summed to obtain the time-lapse structure matrix of the state data, and then supervised kernel independent component analysis (SKICA) is established, the independent component feature data is extracted from the status data and the monitoring statistics are constructed to detect the process faults. The data show that kernel independent component analysis (ICA) method (KICA) method can detect slow fault faster than the ICA method, except that the statistical detection ability of F3 and FS is reduced, and the KICA method can significantly improve the detection performance of other faults and statistics. By analyzing the detection results of SKICA method, it is obvious that in the detection process of all five kinds of slow faults, the fault detection capability of SKICA is better than that of ICA and KICA. The results of continuous stirred reactor simulation system show that, compared with the basic linear process, the slow fault detection has a good monitoring performance, it can detect the small deviation in the process sensitively and give alarm information to the slow fault in time, to improve the fault detection rate.