工艺参数对搅拌摩擦加工Al/Ni-Fe复合材料拉伸性能的影响

L. Magondo, M. Shongwe, Rasheedat Modupe Mahamood, S. Akinlabi, S. Hassan, H. Dong, K. F. Carter, E. Akinlabi
{"title":"工艺参数对搅拌摩擦加工Al/Ni-Fe复合材料拉伸性能的影响","authors":"L. Magondo, M. Shongwe, Rasheedat Modupe Mahamood, S. Akinlabi, S. Hassan, H. Dong, K. F. Carter, E. Akinlabi","doi":"10.35219/AWET.2020.09","DOIUrl":null,"url":null,"abstract":"Friction stir processing (FSP) is a solid-state processing technique that has proven to be an efficient surface modification process for producing aluminium matrix composites (AMCs). However, practical challenges still occur during the processing of AMCs even though extensive progress has been made in recent years. In the present study, the influence of FSP process parameters on the tensile property of Al-Ni-Fe composite has been investigated. The process parameters studied were rotational speed and advancing speed. The rotational speed varied between 600 and 1000 rpm while the advancing speed varied between 70 and 210 mm/min. The rotational speed was kept constant at each setting and the advancing speed varied. Other processing parameters were kept constant throughout the experiments. The results were compared with those of the base metal (Al). The results showed that the tensile strength decreased as the advancing speed increased. The highest tensile strength was obtained at a rotational speed of 1000 rpm and an advancing speed of 70 mm/min.","PeriodicalId":39009,"journal":{"name":"Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology","volume":"63 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-12-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Process Parameter Influence on Tensile Property of Friction Stir Processed Al/Ni-Fe Composite\",\"authors\":\"L. Magondo, M. Shongwe, Rasheedat Modupe Mahamood, S. Akinlabi, S. Hassan, H. Dong, K. F. Carter, E. Akinlabi\",\"doi\":\"10.35219/AWET.2020.09\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Friction stir processing (FSP) is a solid-state processing technique that has proven to be an efficient surface modification process for producing aluminium matrix composites (AMCs). However, practical challenges still occur during the processing of AMCs even though extensive progress has been made in recent years. In the present study, the influence of FSP process parameters on the tensile property of Al-Ni-Fe composite has been investigated. The process parameters studied were rotational speed and advancing speed. The rotational speed varied between 600 and 1000 rpm while the advancing speed varied between 70 and 210 mm/min. The rotational speed was kept constant at each setting and the advancing speed varied. Other processing parameters were kept constant throughout the experiments. The results were compared with those of the base metal (Al). The results showed that the tensile strength decreased as the advancing speed increased. The highest tensile strength was obtained at a rotational speed of 1000 rpm and an advancing speed of 70 mm/min.\",\"PeriodicalId\":39009,\"journal\":{\"name\":\"Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology\",\"volume\":\"63 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-12-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.35219/AWET.2020.09\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Annals of Dunarea de Jos University of Galati, Fascicle XII, Welding Equipment and Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.35219/AWET.2020.09","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

摘要

搅拌摩擦加工(FSP)是一种固态加工技术,已被证明是生产铝基复合材料(AMCs)的有效表面改性工艺。然而,尽管近年来取得了广泛的进展,但在AMCs的加工过程中仍然存在实际挑战。本文研究了FSP工艺参数对Al-Ni-Fe复合材料拉伸性能的影响。研究的工艺参数为转速和推进速度。转速在600 ~ 1000rpm之间变化,推进速度在70 ~ 210mm /min之间变化。每次设置时,转速保持不变,推进速度变化。其他工艺参数在整个实验过程中保持不变。结果与母材(Al)进行了比较。结果表明:拉伸强度随推进速度的增加而降低;转速为1000 rpm,推进速度为70 mm/min时,拉伸强度最高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
Process Parameter Influence on Tensile Property of Friction Stir Processed Al/Ni-Fe Composite
Friction stir processing (FSP) is a solid-state processing technique that has proven to be an efficient surface modification process for producing aluminium matrix composites (AMCs). However, practical challenges still occur during the processing of AMCs even though extensive progress has been made in recent years. In the present study, the influence of FSP process parameters on the tensile property of Al-Ni-Fe composite has been investigated. The process parameters studied were rotational speed and advancing speed. The rotational speed varied between 600 and 1000 rpm while the advancing speed varied between 70 and 210 mm/min. The rotational speed was kept constant at each setting and the advancing speed varied. Other processing parameters were kept constant throughout the experiments. The results were compared with those of the base metal (Al). The results showed that the tensile strength decreased as the advancing speed increased. The highest tensile strength was obtained at a rotational speed of 1000 rpm and an advancing speed of 70 mm/min.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
0.80
自引率
0.00%
发文量
1
审稿时长
16 weeks
期刊最新文献
Non-Destructive Testing of Magnetically Impelled Arc Butt Welding of Mild Steel Tubes Effect of GTAW on the Tensile Strength and Hardness of Mild Steel Machine Learning for Parametrical Analysis of Friction Stir Welded Aluminum Metal Matrix Composites Mechanical Characterization of Filler Modified ABS 3D Printed Composites Made via Fused Filament Fabrication Review of Joining Various Materials by FSW Process and Applications
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1