Characteristic of particles created by preparatory operationsof the particleboard production process

Characteristic of particles created by preparatory operations of the particleboard production process.The production of wood-based panels, taking into account material innovations, involves the need to adjust the operation of technological devices to the properties of basic and auxiliary materials. In this study, it was decided to check the particle sizes after sorting raw materials representing 3 groups: forest biomass – pine branches, agricultural biomass - oilseed plant straw, and post-production material. Fractions were taken from the 2.00 mm mesh sieve of a sorter for the core layer of the particleboard and the fractional composition was determined by sieve analysis. The average linear particle dimensions and bulk density of each lignocellulosic raw material were also determined. Due to the varying proportions, it is necessary to adapt the parameters of the technological operations to the specifics of the raw material being processed or to introduce guidelines for the selection of particle sizes guided by their actual average size. Studies have shown differences between the individual materials. This is particularly important, as proper preparation of the raw material translates into the quality of the boards produced from them and the efficiency of the entire process.