Magnetic Resonance: Says it as it is!

Magnetic resonance (MR) is a very robust service that delivers several formation evaluation products. Both the wireline (WL) and logging-while-drilling (LWD) services deliver shale volume, porosity, permeability, viscosity, saturation and fluid typing. In addition to these, the WL service also delivers capillary pressure and grain size analysis. Although WL and LWD MR Services have different modes of acquisition, the result is usually the same. WL MR uses multiple frequencies, but LWD MR uses a single frequency. Multiple frequencies provide multiple magnetic field gradients that provide for more flexible hydrocarbon typing acquisition sequences, unlike the LWD MR single frequency that supplies a single hydrocarbon acquisition sequence. Dual Wait Time (DTW) analysis is the hydrocarbon typing technique for LWD MR, but the WL hydrocarbon typing has the flexibility to choose from a range of applications that includes two-dimensional MR mapping (2D MR), density multiple wait time (DMTW) analysis, multiple gradient inter-echo spacing (MGTE) analysis, simultaneous inversion of multiple echo trains (SIMET), and T1/T2 ratio (R-T2) analysis for gas reservoirs. Light hydrocarbons (gas) and Kaolinitic shales compromise the use of neutron-density and gamma ray models as bulk shale volume indicators. However, MR shale volume computation using clay-bound water (CBW), which is unaffected by the presence of gas or Kaolinitic shales. MR Logs can accurately determine porosity in complex lithologies and thin beds. Irreducible water saturation from MR is used to determine reservoir quality and productivity. In the industry today, MR logs are the most tolerant to environmental challenges. They are able to "say" the true state of the reservoir in the midst of environmental factors like the presence of gas, shales, and thin beds, which are known to adversely impact measurements from other conventional tools