Amena Alharthi, Pierre Van Laer, Trevor Brooks, Pierre-Olivier Goiran, M. Baig, Nabila Lazreq, Hamza Abdelhalim, Hassan Al Marzooqi, Marco Coscia
{"title":"石赖夫页岩油从垂直试点到水平整合的成功案例","authors":"Amena Alharthi, Pierre Van Laer, Trevor Brooks, Pierre-Olivier Goiran, M. Baig, Nabila Lazreq, Hamza Abdelhalim, Hassan Al Marzooqi, Marco Coscia","doi":"10.2118/208135-ms","DOIUrl":null,"url":null,"abstract":"\n The development of unconventional target in the Shilaif formation is in line with the Unconventional objective towards adding to ADNOC reserves. For future optimization of development plans, it is of utmost importance to understand and test and therefore prove the productivity of the future Unconventional Horizontal Oil wells.\n The Shilaif formation was deposited in a deeper water intrashelf basin with thicknesses varying from 600 to 800 ft from deep basin to slope respectively. The formation is subdivided into 3 main composite sequences each with separate source and clean tight carbonates. The well under consideration (Well A-V for the vertical pilot and Well A-H for the horizontal wellbore) was drilled on purpose in a deep synclinal area to access the best possible oil generation and maturity in these shale Oil plays.\n Due to the stacked nature of these thick high-quality reservoirs, a pilot well is drilled to perform reservoir characterization and test hydrocarbon type and potential from each bench. Fracturing and testing are performed in each reservoir layer for the primary purpose to evaluate and collect key fracturing and reservoir parameter required to calibrate petrophysical and geomechanical model, landing target optimization and ultimately for the design of the development plan of this stacked play. Frac height, reservoir fluid composition and deliverability, pore pressure are among key data collected. The landing point selected based on the comprehensive unconventional core analysis integrated with petrophysical and geomechanical outcomes using post vertical frac and test results. Well A-H was drilled as a sidetrack from the pilot hole Well A-V. This lateral section was logged with LWD Triple Combo while Resistivity Image was acquired on WL. Based on the logging data the well stayed in the target Layer / formation, cutting analysis data for XRD and TOC was integrated with the petrophysical results in A-H well.\n Production test results from subject were among the highest rate seen during exploration and appraisal of this unconventional oil plays and compete with the current commercial top tier analog unconventional oil plays. Achieving those results in such early exploration phases is huge milestone for ADNOC unconventional exploration journey in UAE and sign of promising future development.","PeriodicalId":11069,"journal":{"name":"Day 2 Tue, November 16, 2021","volume":"16 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2021-12-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Integration Success Story in Shilaif Shale Oil from Vertical Pilot to Horizontal\",\"authors\":\"Amena Alharthi, Pierre Van Laer, Trevor Brooks, Pierre-Olivier Goiran, M. Baig, Nabila Lazreq, Hamza Abdelhalim, Hassan Al Marzooqi, Marco Coscia\",\"doi\":\"10.2118/208135-ms\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n The development of unconventional target in the Shilaif formation is in line with the Unconventional objective towards adding to ADNOC reserves. For future optimization of development plans, it is of utmost importance to understand and test and therefore prove the productivity of the future Unconventional Horizontal Oil wells.\\n The Shilaif formation was deposited in a deeper water intrashelf basin with thicknesses varying from 600 to 800 ft from deep basin to slope respectively. The formation is subdivided into 3 main composite sequences each with separate source and clean tight carbonates. The well under consideration (Well A-V for the vertical pilot and Well A-H for the horizontal wellbore) was drilled on purpose in a deep synclinal area to access the best possible oil generation and maturity in these shale Oil plays.\\n Due to the stacked nature of these thick high-quality reservoirs, a pilot well is drilled to perform reservoir characterization and test hydrocarbon type and potential from each bench. Fracturing and testing are performed in each reservoir layer for the primary purpose to evaluate and collect key fracturing and reservoir parameter required to calibrate petrophysical and geomechanical model, landing target optimization and ultimately for the design of the development plan of this stacked play. Frac height, reservoir fluid composition and deliverability, pore pressure are among key data collected. The landing point selected based on the comprehensive unconventional core analysis integrated with petrophysical and geomechanical outcomes using post vertical frac and test results. Well A-H was drilled as a sidetrack from the pilot hole Well A-V. This lateral section was logged with LWD Triple Combo while Resistivity Image was acquired on WL. Based on the logging data the well stayed in the target Layer / formation, cutting analysis data for XRD and TOC was integrated with the petrophysical results in A-H well.\\n Production test results from subject were among the highest rate seen during exploration and appraisal of this unconventional oil plays and compete with the current commercial top tier analog unconventional oil plays. Achieving those results in such early exploration phases is huge milestone for ADNOC unconventional exploration journey in UAE and sign of promising future development.\",\"PeriodicalId\":11069,\"journal\":{\"name\":\"Day 2 Tue, November 16, 2021\",\"volume\":\"16 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-12-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Day 2 Tue, November 16, 2021\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2118/208135-ms\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 2 Tue, November 16, 2021","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/208135-ms","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Integration Success Story in Shilaif Shale Oil from Vertical Pilot to Horizontal
The development of unconventional target in the Shilaif formation is in line with the Unconventional objective towards adding to ADNOC reserves. For future optimization of development plans, it is of utmost importance to understand and test and therefore prove the productivity of the future Unconventional Horizontal Oil wells.
The Shilaif formation was deposited in a deeper water intrashelf basin with thicknesses varying from 600 to 800 ft from deep basin to slope respectively. The formation is subdivided into 3 main composite sequences each with separate source and clean tight carbonates. The well under consideration (Well A-V for the vertical pilot and Well A-H for the horizontal wellbore) was drilled on purpose in a deep synclinal area to access the best possible oil generation and maturity in these shale Oil plays.
Due to the stacked nature of these thick high-quality reservoirs, a pilot well is drilled to perform reservoir characterization and test hydrocarbon type and potential from each bench. Fracturing and testing are performed in each reservoir layer for the primary purpose to evaluate and collect key fracturing and reservoir parameter required to calibrate petrophysical and geomechanical model, landing target optimization and ultimately for the design of the development plan of this stacked play. Frac height, reservoir fluid composition and deliverability, pore pressure are among key data collected. The landing point selected based on the comprehensive unconventional core analysis integrated with petrophysical and geomechanical outcomes using post vertical frac and test results. Well A-H was drilled as a sidetrack from the pilot hole Well A-V. This lateral section was logged with LWD Triple Combo while Resistivity Image was acquired on WL. Based on the logging data the well stayed in the target Layer / formation, cutting analysis data for XRD and TOC was integrated with the petrophysical results in A-H well.
Production test results from subject were among the highest rate seen during exploration and appraisal of this unconventional oil plays and compete with the current commercial top tier analog unconventional oil plays. Achieving those results in such early exploration phases is huge milestone for ADNOC unconventional exploration journey in UAE and sign of promising future development.