{"title":"缺口三点弯曲试验结果与模型规范2010公式的比较","authors":"V. Hlavicka","doi":"10.32970/cs.2021.1.2","DOIUrl":null,"url":null,"abstract":"The primary application of the notched three point bending test (3PBT) is to determine the fracture energy of concrete. However, the measurement setup is also suitable for determining additional mechanical parameters: flexural tensile strength, modulus of elasticity, and indirectly the compressive strength also. The aim of this paper is to present the calculation methods of the mechanical properties that can be determined from the results of a test series in which mixtures with different types of aggregates were used (quartz, dolomite, limestone, andesite, expanded clay). To validate the obtained results, the parameters determined from the measurements are compared to the formulas of the fib Model Code 2010. A recommendation is also presented for the calculation of the fracture energy by using compressive strength values measured on a half prism.","PeriodicalId":87278,"journal":{"name":"International journal of concrete structures & materials","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2021-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Comparison of the result of notched three point bending test with Model Code 2010 formulas\",\"authors\":\"V. Hlavicka\",\"doi\":\"10.32970/cs.2021.1.2\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The primary application of the notched three point bending test (3PBT) is to determine the fracture energy of concrete. However, the measurement setup is also suitable for determining additional mechanical parameters: flexural tensile strength, modulus of elasticity, and indirectly the compressive strength also. The aim of this paper is to present the calculation methods of the mechanical properties that can be determined from the results of a test series in which mixtures with different types of aggregates were used (quartz, dolomite, limestone, andesite, expanded clay). To validate the obtained results, the parameters determined from the measurements are compared to the formulas of the fib Model Code 2010. A recommendation is also presented for the calculation of the fracture energy by using compressive strength values measured on a half prism.\",\"PeriodicalId\":87278,\"journal\":{\"name\":\"International journal of concrete structures & materials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2021-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International journal of concrete structures & materials\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.32970/cs.2021.1.2\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International journal of concrete structures & materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.32970/cs.2021.1.2","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Comparison of the result of notched three point bending test with Model Code 2010 formulas
The primary application of the notched three point bending test (3PBT) is to determine the fracture energy of concrete. However, the measurement setup is also suitable for determining additional mechanical parameters: flexural tensile strength, modulus of elasticity, and indirectly the compressive strength also. The aim of this paper is to present the calculation methods of the mechanical properties that can be determined from the results of a test series in which mixtures with different types of aggregates were used (quartz, dolomite, limestone, andesite, expanded clay). To validate the obtained results, the parameters determined from the measurements are compared to the formulas of the fib Model Code 2010. A recommendation is also presented for the calculation of the fracture energy by using compressive strength values measured on a half prism.