{"title":"Influence of reflow soldering profiles on creation of IMC at the interface of SnBi/Cu","authors":"M. Hirman, K. Rendl, F. Steiner, V. Wirth","doi":"10.1109/ISSE.2014.6887582","DOIUrl":null,"url":null,"abstract":"The paper describes the effect of the solder profile on the formation of an intermetallic layer in the solder composition of 57.6% Bi-42% Sn-0.4% Ag. Soldered joints were made by soldering of chip resistors of 1206 size with different soldering reflow profiles. Solder pads on the PCB are made of copper therefore they mainly make Cu6Sn5 IMC. This layer has an effect on the mechanical strength of the soldered joint. Samples are measured by using the shear strength test. The thickness of the IMC layer is measured by Confocal Laser Scanning Microscope. IMC layer thickness grows with greater delivered energy into the joint during soldering.","PeriodicalId":375711,"journal":{"name":"Proceedings of the 2014 37th International Spring Seminar on Electronics Technology","volume":"14 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2014-05-07","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"13","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the 2014 37th International Spring Seminar on Electronics Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISSE.2014.6887582","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 13
Abstract
The paper describes the effect of the solder profile on the formation of an intermetallic layer in the solder composition of 57.6% Bi-42% Sn-0.4% Ag. Soldered joints were made by soldering of chip resistors of 1206 size with different soldering reflow profiles. Solder pads on the PCB are made of copper therefore they mainly make Cu6Sn5 IMC. This layer has an effect on the mechanical strength of the soldered joint. Samples are measured by using the shear strength test. The thickness of the IMC layer is measured by Confocal Laser Scanning Microscope. IMC layer thickness grows with greater delivered energy into the joint during soldering.
京公网安备 11010802042870号
京ICP备2023020795号-1
分享
求助内容：
应助结果提醒方式：
扫码关注我们
