Process Characterization and the Effect of Process Defects on Flip Chip Reliability

Abstract

Processing fine pitch flip chip devices continues to pose problems for packaging and manufacturing engineers. Optimizing process parameters such that defects are limited and long-term reliability of the assembly is increased can be a very tedious task. Parameters that effect the robustness of the process include the flux type and placement parameters. Ultimately, these process parameters can effect the long-term reliability of the flip chip assembly by either inhibiting or inducing process defects. Therefore, care is taken to develop a process that is robust enough to supply high yields and long term reliability, but still remains compatible with a standard surface mount technology process. This is where process optimization becomes most critical and difficult. What is the optimum height of the flux thin film used for a dip process? What force is required to insure that the solder bumps make contact with the pads? What are the limiting boundaries in which high yields and high reliabilities are achieved, while maintaining a streamlined, proven process? The following study evaluates a set of process parameters and their impact on process defects and reliability. The study evaluates process parameters including, flux type, flux application parameters, placement force and placement accuracy to determine their impact. Solder voiding, inadequate solder wetting, and crack propagation and delamination in the underfill layer are defects examined in the study. Assemblies will be subjected to liquid-to-liquid thermal shock testing (−55° C to 125°C) to determine failure modes due to the aforementioned defects. The results will show how changes in process parameters effect yield and reliability.