Analisis Sistem Koordinasi Proteksi Over Current Relay (Ocr) Dan Ground Fault Relay (Gfr) Tegangan 20 Kv Bay Trafo Pada Gardu Induk Sanga-Sanga Kalimantan Timur
Sarma Thaha, A. Indrawan, Yosua Januarius Pongkiding
{"title":"Analisis Sistem Koordinasi Proteksi Over Current Relay (Ocr) Dan Ground Fault Relay (Gfr) Tegangan 20 Kv Bay Trafo Pada Gardu Induk Sanga-Sanga Kalimantan Timur","authors":"Sarma Thaha, A. Indrawan, Yosua Januarius Pongkiding","doi":"10.31963/elekterika.v6i2.3527","DOIUrl":null,"url":null,"abstract":"As a provider of electricity services, PLN is required to provide service and supply of electricity with good quality, continuity, improvement and efficiency. Disturbances in distribution systems are short circuit faults between phases or ground phase faults. To protect properly, proper coordination of relay settings is required. Among the equipment in the protection system used in distribution lines are overcurrent relays (OCR) and ground fault relays (GFR). In this study, an analysis of the OCR and GFR settings will be carried out on a 20 kV cubicle at the Sanga-Sanga Substation, East Kalimantan, with the help of the DigSILENT Power Factory 15.1.7 application with a disturbance simulation at 10% and 90% of the feeder length. Based on the analysis results, it is obtained that the short circuit results of 3 phases, 2 phases, and 1 phase to the ground have a value that is not much different from the calculation, while the OCR setting for the outgoing relay is 0.8 A on the secondary side. TMS is 0.083 seconds while the relay is on the incoming side of 20 kV 1 A and TMS of 0.198 seconds. The GFR setting for the outgoing relay is 0.06 A on the secondary side, and TMS is 0.1 seconds, and the relay on the incoming side is 20 kV 0.015 A and TMS is 0.26 seconds).","PeriodicalId":316017,"journal":{"name":"Jurnal Teknologi Elekterika","volume":"433 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-11-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Jurnal Teknologi Elekterika","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31963/elekterika.v6i2.3527","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
As a provider of electricity services, PLN is required to provide service and supply of electricity with good quality, continuity, improvement and efficiency. Disturbances in distribution systems are short circuit faults between phases or ground phase faults. To protect properly, proper coordination of relay settings is required. Among the equipment in the protection system used in distribution lines are overcurrent relays (OCR) and ground fault relays (GFR). In this study, an analysis of the OCR and GFR settings will be carried out on a 20 kV cubicle at the Sanga-Sanga Substation, East Kalimantan, with the help of the DigSILENT Power Factory 15.1.7 application with a disturbance simulation at 10% and 90% of the feeder length. Based on the analysis results, it is obtained that the short circuit results of 3 phases, 2 phases, and 1 phase to the ground have a value that is not much different from the calculation, while the OCR setting for the outgoing relay is 0.8 A on the secondary side. TMS is 0.083 seconds while the relay is on the incoming side of 20 kV 1 A and TMS of 0.198 seconds. The GFR setting for the outgoing relay is 0.06 A on the secondary side, and TMS is 0.1 seconds, and the relay on the incoming side is 20 kV 0.015 A and TMS is 0.26 seconds).
作为电力服务的提供者,要求PLN提供优质、持续、改进和高效的服务和电力供应。配电系统中的扰动主要是相间短路故障或地相故障。为了正确保护,需要适当协调继电器设置。在配电线路保护系统中,有过流继电器(OCR)和接地故障继电器(GFR)。在本研究中,将在东加里曼丹Sanga-Sanga变电站的20 kV隔间上进行OCR和GFR设置分析,借助DigSILENT Power Factory 15.1.7应用程序,在馈线长度的10%和90%处进行干扰模拟。根据分析结果,得到3相、2相、1相对地的短路结果值与计算值相差不大,而出线继电器二次侧OCR整定值为0.8 a。继电器在20kv 1a进线侧时,TMS为0.083秒,TMS为0.198秒。出线继电器二次侧GFR设为0.06 A, TMS设为0.1 s,进线继电器20 kV 0.015 A, TMS设为0.26 s)。