Experimental and Analytical Studies of the Relationship between the Combustibility of Materials and the Parameters of Ignition Sources in the Pressurized Chambers with Oxygen-Enriched Media and at the Elevated Pressure

I.A. Bolodyan, L.P. Vogman, D.A. Korolchenko
{"title":"Experimental and Analytical Studies of the Relationship between the Combustibility of Materials and the Parameters of Ignition Sources in the Pressurized Chambers with Oxygen-Enriched Media and at the Elevated Pressure","authors":"I.A. Bolodyan, L.P. Vogman, D.A. Korolchenko","doi":"10.24000/0409-2961-2023-8-15-19","DOIUrl":null,"url":null,"abstract":"The results are presented related to the experimental and analytical studies of the relationship between the combustibility of materials and the parameters of ignition sources in the equipment with oxygen-enriched media and at an elevated pressure. It is shown that when materials used in the thermal chambers are heated, the temperature of spontaneous ignition increases significantly near combustion limits in terms of oxidant concentration and pressure, and a regime occurs, in which gasification of the sample can take place without ignition. The nature of the ignition of the insulation of the wire and materials depends on the current load. The time from the beginning of the short circuit to the beginning of the pyrolysis process, i.e. before the appearance of smoke, according to the calculations, is inversely dependent on the square of the current strength. The ignition delay time of the materials in the cable composition tends to decrease with increasing current. Moreover, at the same current density, the ignition delay time of materials from a single wire is less than that of a cable even with a current load of four wires. This circumstance and the patterns obtained for the ignition of materials from a single wire allow to conclude that the response time of the current protection for cables can be selected based on the delay time for the ignition of materials from a single wire.","PeriodicalId":35650,"journal":{"name":"Bezopasnost'' Truda v Promyshlennosti","volume":"12 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Bezopasnost'' Truda v Promyshlennosti","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.24000/0409-2961-2023-8-15-19","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Engineering","Score":null,"Total":0}
引用次数: 0

Abstract

The results are presented related to the experimental and analytical studies of the relationship between the combustibility of materials and the parameters of ignition sources in the equipment with oxygen-enriched media and at an elevated pressure. It is shown that when materials used in the thermal chambers are heated, the temperature of spontaneous ignition increases significantly near combustion limits in terms of oxidant concentration and pressure, and a regime occurs, in which gasification of the sample can take place without ignition. The nature of the ignition of the insulation of the wire and materials depends on the current load. The time from the beginning of the short circuit to the beginning of the pyrolysis process, i.e. before the appearance of smoke, according to the calculations, is inversely dependent on the square of the current strength. The ignition delay time of the materials in the cable composition tends to decrease with increasing current. Moreover, at the same current density, the ignition delay time of materials from a single wire is less than that of a cable even with a current load of four wires. This circumstance and the patterns obtained for the ignition of materials from a single wire allow to conclude that the response time of the current protection for cables can be selected based on the delay time for the ignition of materials from a single wire.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
富氧介质增压室及高压下材料可燃性与点火源参数关系的实验与分析研究
本文介绍了在富氧介质和高压条件下,材料的可燃性与点火源参数关系的实验和分析研究结果。结果表明,当在热室中使用的材料被加热时,自燃温度在氧化剂浓度和压力方面显著增加,接近燃烧极限,并且出现了一种状态,在这种状态下,样品可以在不着火的情况下发生气化。电线和材料绝缘的着火性质取决于电流负载。根据计算,从短路开始到热解过程开始,即烟雾出现之前的时间与电流强度的平方成反比。电缆组成中材料的滞燃时间随电流的增大而减小。此外,在相同的电流密度下,单线材料的点火延迟时间小于四线负载下电缆的点火延迟时间。这种情况和从单根电线中获得的材料着火的模式可以得出结论,电缆电流保护的响应时间可以根据单根电线中材料着火的延迟时间来选择。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Bezopasnost'' Truda v Promyshlennosti
Bezopasnost'' Truda v Promyshlennosti Environmental Science-Environmental Science (miscellaneous)
CiteScore
1.00
自引率
0.00%
发文量
110
期刊最新文献
Analytical Methodology for Substantiating the Optimal Frequency of Scheduled Inspections of the Fire-fighting Condition of Industrial and Warehouse Buildings Increasing Geodynamic Safety by Managing Induced Seismicity During the Development of Solid Mineral Deposits Critique and Improvement of the Regulatory Framework on the Calculation of Structures for Seismic Impacts On the Problem of the Large Tires Safe Operation Improving the Labor Safety of Mining Dump Truck Drivers by Reducing the Risk of Failure of the Functional Units of the Traction Electric Drive under Operating Conditions
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1