Multi-objective optimization of key process parameters in laser cladding Stellite12 cobalt-based alloy powder

IF 1.7 4区 工程技术 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY Journal of Laser Applications Pub Date : 2023-12-13 DOI:10.2351/7.0001163
Yang Zou, Shaoqi Shi, Zefeng Yang, Teng Xu, Yongqi Liang, Qiang Yu, Yuchuan Cheng, Gaojie Xu, Zhixiang Li, Fei Long
{"title":"Multi-objective optimization of key process parameters in laser cladding Stellite12 cobalt-based alloy powder","authors":"Yang Zou, Shaoqi Shi, Zefeng Yang, Teng Xu, Yongqi Liang, Qiang Yu, Yuchuan Cheng, Gaojie Xu, Zhixiang Li, Fei Long","doi":"10.2351/7.0001163","DOIUrl":null,"url":null,"abstract":"Laser cladding (LC) process parameters have a substantial influence on coating morphology and mechanical characteristics; it is necessary to optimize key parameters for laser processing. In this study, Stellite12 cobalt-based alloy powder with excellent corrosion and wear resistance was selected as the cladding material. The multi-objective optimization model of the LC process was established by response surface methodology, laser power, scanning speed, and powder feeding rate as input factors, and the target response variables involve dilution, aspect ratio, and microhardness of the single-track cladding. Combined with variance analysis (ANOVA), the multi-objective optimization of laser power, scanning speed, and powder feeding rate was conducted. A single-track cladding layer with a dilution of 18.29%, an aspect ratio of 3.88, and a microhardness of 634.67 HV0.2 was obtained using the optimized process parameters. Errors between the predicted and actual values of single-track cladding dilution, aspect ratio, and microhardness were less than 8%, which verified the accuracy of the established model.","PeriodicalId":50168,"journal":{"name":"Journal of Laser Applications","volume":"10 11","pages":""},"PeriodicalIF":1.7000,"publicationDate":"2023-12-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Laser Applications","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.2351/7.0001163","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

Abstract

Laser cladding (LC) process parameters have a substantial influence on coating morphology and mechanical characteristics; it is necessary to optimize key parameters for laser processing. In this study, Stellite12 cobalt-based alloy powder with excellent corrosion and wear resistance was selected as the cladding material. The multi-objective optimization model of the LC process was established by response surface methodology, laser power, scanning speed, and powder feeding rate as input factors, and the target response variables involve dilution, aspect ratio, and microhardness of the single-track cladding. Combined with variance analysis (ANOVA), the multi-objective optimization of laser power, scanning speed, and powder feeding rate was conducted. A single-track cladding layer with a dilution of 18.29%, an aspect ratio of 3.88, and a microhardness of 634.67 HV0.2 was obtained using the optimized process parameters. Errors between the predicted and actual values of single-track cladding dilution, aspect ratio, and microhardness were less than 8%, which verified the accuracy of the established model.
查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
多目标优化激光熔覆 Stellite12 钴基合金粉末的关键工艺参数
激光熔覆(LC)工艺参数对涂层形貌和机械特性有很大影响,因此有必要优化激光加工的关键参数。本研究选择了具有优异耐腐蚀性和耐磨性的 Stellite12 钴基合金粉末作为熔覆材料。以激光功率、扫描速度和送粉率为输入因子,以单轨熔覆材料的稀释度、长宽比和显微硬度为目标响应变量,采用响应面方法建立了激光熔覆工艺的多目标优化模型。结合方差分析(ANOVA),对激光功率、扫描速度和送粉率进行了多目标优化。使用优化后的工艺参数,获得了稀释度为 18.29%、纵横比为 3.88、显微硬度为 634.67 HV0.2 的单轨熔覆层。单轨包层稀释度、纵横比和显微硬度的预测值与实际值之间的误差均小于 8%,这验证了所建立模型的准确性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
CiteScore
3.60
自引率
9.50%
发文量
125
审稿时长
>12 weeks
期刊介绍: The Journal of Laser Applications (JLA) is the scientific platform of the Laser Institute of America (LIA) and is published in cooperation with AIP Publishing. The high-quality articles cover a broad range from fundamental and applied research and development to industrial applications. Therefore, JLA is a reflection of the state-of-R&D in photonic production, sensing and measurement as well as Laser safety. The following international and well known first-class scientists serve as allocated Editors in 9 new categories: High Precision Materials Processing with Ultrafast Lasers Laser Additive Manufacturing High Power Materials Processing with High Brightness Lasers Emerging Applications of Laser Technologies in High-performance/Multi-function Materials and Structures Surface Modification Lasers in Nanomanufacturing / Nanophotonics & Thin Film Technology Spectroscopy / Imaging / Diagnostics / Measurements Laser Systems and Markets Medical Applications & Safety Thermal Transportation Nanomaterials and Nanoprocessing Laser applications in Microelectronics.
期刊最新文献
Experimental evaluation of a WC–Co alloy layer formation process by multibeam-type laser metal deposition with blue diode lasers Texturing skin-pass rolls by high-speed laser melt injection, laser ablation, and electrolytic etching Investigating the influence of thermal behavior on microstructure during solidification in laser powder bed fusion of AlSi10Mg alloys: A phase-field analysis High-power fiber-coupled diode laser welding of 10-mm thick Inconel 617 superalloy Influence of temperature and beam size on weld track shape in laser powder bed fusion of pure copper using near-infrared laser system
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1