Real-time estimation of longitudinal tire stiffness considering dynamic characteristics of tire

IF 3.1 3区 计算机科学 Q2 AUTOMATION & CONTROL SYSTEMS Mechatronics Pub Date : 2023-12-22 DOI:10.1016/j.mechatronics.2023.103120
Jongyong Do , Dongyoon Hyun , Kyoungseok Han , Seibum B. Choi
{"title":"Real-time estimation of longitudinal tire stiffness considering dynamic characteristics of tire","authors":"Jongyong Do ,&nbsp;Dongyoon Hyun ,&nbsp;Kyoungseok Han ,&nbsp;Seibum B. Choi","doi":"10.1016/j.mechatronics.2023.103120","DOIUrl":null,"url":null,"abstract":"<div><p><span>To enhance the effectiveness of active safety control, the tire–road friction coefficient (TRFC) must be precisely estimated, and the longitudinal tire stiffness coefficient is an important vehicle dynamic parameter to estimate TRFC. In this research, we present an observer that improves the performance of longitudinal tire stiffness coefficient estimation by applying tire dynamics that were previously applied in the </span>lateral direction<span> to the longitudinal direction<span>. To begin, we model longitudinal tire dynamics using the relaxation length concept and validate the model using vehicle braking tests. We develop an observer that estimates the longitudinal tire stiffness coefficient by integrating the proposed tire dynamics and vehicle dynamics. The observer, which is based on an extended Kalman filter<span>, can be applied to nonlinear systems and successfully removes noise from wheel speed measurement. The observer’s estimation performance is verified using CarSim simulation and vehicle tests, and the results are compared to existing approaches that do not account for longitudinal tire dynamics. Even in the transient section when the vehicle begins accelerating, the difference between the estimate and the reference value is about 0.3% using the proposed method, but if tire dynamics are not taken into account, the estimate is 6.5% lower than the reference value.</span></span></span></p></div>","PeriodicalId":49842,"journal":{"name":"Mechatronics","volume":"98 ","pages":"Article 103120"},"PeriodicalIF":3.1000,"publicationDate":"2023-12-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mechatronics","FirstCategoryId":"94","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0957415823001769","RegionNum":3,"RegionCategory":"计算机科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"AUTOMATION & CONTROL SYSTEMS","Score":null,"Total":0}
引用次数: 0

Abstract

To enhance the effectiveness of active safety control, the tire–road friction coefficient (TRFC) must be precisely estimated, and the longitudinal tire stiffness coefficient is an important vehicle dynamic parameter to estimate TRFC. In this research, we present an observer that improves the performance of longitudinal tire stiffness coefficient estimation by applying tire dynamics that were previously applied in the lateral direction to the longitudinal direction. To begin, we model longitudinal tire dynamics using the relaxation length concept and validate the model using vehicle braking tests. We develop an observer that estimates the longitudinal tire stiffness coefficient by integrating the proposed tire dynamics and vehicle dynamics. The observer, which is based on an extended Kalman filter, can be applied to nonlinear systems and successfully removes noise from wheel speed measurement. The observer’s estimation performance is verified using CarSim simulation and vehicle tests, and the results are compared to existing approaches that do not account for longitudinal tire dynamics. Even in the transient section when the vehicle begins accelerating, the difference between the estimate and the reference value is about 0.3% using the proposed method, but if tire dynamics are not taken into account, the estimate is 6.5% lower than the reference value.

查看原文
分享 分享
微信好友 朋友圈 QQ好友 复制链接
本刊更多论文
考虑轮胎动态特性的轮胎纵向刚度实时估算
为提高主动安全控制的有效性,必须精确估算轮胎与路面的摩擦系数(TRFC),而纵向轮胎刚度系数是估算 TRFC 的重要车辆动态参数。在这项研究中,我们提出了一种观测器,通过将以前应用于横向方向的轮胎动力学应用于纵向方向,提高了纵向轮胎刚度系数估算的性能。首先,我们使用松弛长度概念对轮胎纵向动力学进行建模,并使用车辆制动测试对模型进行验证。我们开发了一种观测器,可通过整合拟议的轮胎动力学和车辆动力学来估算纵向轮胎刚度系数。该观测器基于扩展卡尔曼滤波器,可应用于非线性系统,并能成功消除轮速测量中的噪声。观测器的估计性能通过 CarSim 仿真和车辆测试进行了验证,其结果与不考虑纵向轮胎动力学的现有方法进行了比较。即使在车辆开始加速的瞬态路段,使用所提出的方法,估计值与参考值之间的差值约为 0.3%,但如果不考虑轮胎动态,估计值则比参考值低 6.5%。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 去求助
来源期刊
Mechatronics
Mechatronics 工程技术-工程:电子与电气
CiteScore
5.90
自引率
9.10%
发文量
0
审稿时长
109 days
期刊介绍: Mechatronics is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes. It relates to the design of systems, devices and products aimed at achieving an optimal balance between basic mechanical structure and its overall control. The purpose of this journal is to provide rapid publication of topical papers featuring practical developments in mechatronics. It will cover a wide range of application areas including consumer product design, instrumentation, manufacturing methods, computer integration and process and device control, and will attract a readership from across the industrial and academic research spectrum. Particular importance will be attached to aspects of innovation in mechatronics design philosophy which illustrate the benefits obtainable by an a priori integration of functionality with embedded microprocessor control. A major item will be the design of machines, devices and systems possessing a degree of computer based intelligence. The journal seeks to publish research progress in this field with an emphasis on the applied rather than the theoretical. It will also serve the dual role of bringing greater recognition to this important area of engineering.
期刊最新文献
FPAA-based control of a high-speed flexure-guided AFM nanopositioner Multi-cylinder leveling control systems based on dual-valve parallel and adaptive eccentric torque suppression Active safety control for distributed drive electric vehicle with unilateral motor fault based on mechanical redundancy Recursive terminal sliding mode control for the 3D overhead crane systems with motion planning Stiffness-fault-tolerant control strategy for elastic actuators with interaction impedance adaptation
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
现在去查看 取消
×
提示
确定
0
微信
客服QQ
Book学术公众号 扫码关注我们
反馈
×
意见反馈
请填写您的意见或建议
请填写您的手机或邮箱
已复制链接
已复制链接
快去分享给好友吧!
我知道了
×
扫码分享
扫码分享
Book学术官方微信
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术
文献互助 智能选刊 最新文献 互助须知 联系我们:info@booksci.cn
Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。
Copyright © 2023 Book学术 All rights reserved.
ghs 京公网安备 11010802042870号 京ICP备2023020795号-1